Selecting the Right Nzdf Fiber for Distributed Raman Amplification
نویسنده
چکیده
Distributed Raman amplification, the technology used to increase the span reach in 10 and 40 Gb/s systems, may reduce overall system cost, in part by reducing the number of amplifiers in the network. This technology has been adapted in commercial systems and is now implemented in the field both in the United States, Europe and Asia.
منابع مشابه
Long Distance Signal Transmission in CATV Network Using Distributed Raman Amplification
Distributed Raman amplification based long distance fiber optic transmission systems have been widely deployed for telecommunication applications. Several scattering effects and multiple reflections in a field-installed fibers posed stringent conditions for analog transmission for conventional CATV applications. However, recent advances in grating technology and the development of high-power di...
متن کاملObservation of Raman Gain in Reduced Length of Bismuth Erbium Doped Fiber
Raman amplification of a 49 cm Bismuth oxide (Bi2O3) as a nonlinear gainmedium based erbium doped fiber amplifier (EDFA) is reported in new and compactdesign in near infrared spectral regions. The bismuth glass host provides theopportunity to be doped heavily with erbium ions to allow a compact optical gain fiberamplifier design by using reduced fiber length and the 1480...
متن کاملRaman Amplification And Pulsed Lasing In Cladding-Pumped Germanosilicate Fiber
Introduction: Cladding-pumped rare-earth-doped fibers and Raman fiber devices have been two of the most compelling advances in the area of fiber amplifiers and lasers in recent years. Both cladding-pumped fibers and Raman fiber devices are primarily high-power devices. Cladding-pumping enables pumping with multi-mode pump sources that deliver high-power at a low cost. The core of the double-cla...
متن کاملBOTDA sensor with 2-m spatial resolution over 120 km distance using bi-directional distributed Raman amplification
In this paper we propose the use of optimized bi-directional distributed Raman amplification to enhance the operating range of Brillouin optical time-domain analysis (BOTDA) sensors. In particular by combining high-power fiber-Raman lasers and polarization-multiplexed Fabry-Pérot lasers operating at 1450 nm with low relative-intensity-noise (RIN), we demonstrate distributed sensing (using first...
متن کاملMitigation of nonlinear distortion in hybrid Raman/phase-sensitive amplifier links.
Hybrid systems combining distributed Raman amplification and phase-sensitive amplifiers (PSAs) are investigated in numerical simulations. We focus on the mitigation of fiber nonlinearities and the impact of the span power map which is also important in systems employing optical phase conjugation or phase-conjugated twin waves. We simulate multi-span PSA links with and without distributed Raman ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2006