Morphological, Thermal, Electrical and Electromechanical Properties of Polyvinylidene Fluoride (pvdf)- Functionalized Carbon Nanotube Composites (preprint)
نویسندگان
چکیده
منابع مشابه
Inorganic nanotubes reinforced polyvinylidene fluoride composites as low-cost electromagnetic interference shielding materials
Novel polymer nanocomposites comprising of MnO2 nanotubes (MNTs), functionalized multiwalled carbon nanotubes (f-MWCNTs), and polyvinylidene fluoride (PVDF) were synthesized. Homogeneous distribution of f-MWCNTs and MNTs in PVDF matrix were confirmed by field emission scanning electron microscopy. Electrical conductivity measurements were performed on these polymer composites using four probe t...
متن کاملLow percolation threshold of graphene/polymer composites prepared by solvothermal reduction of graphene oxide in the polymer solution
Graphene/polyvinylidene fluoride (PVDF) composites were prepared using in-situ solvothermal reduction of graphene oxide in the PVDF solution. The electrical conductivity of the composites was greatly improved by doping with graphene sheets. The percolation threshold of such composite was determined to be 0.31 vol.%, being much smaller than that of the composites prepared via blending reduced gr...
متن کاملElectrical behavior and positive temperature coefficient effect of graphene/polyvinylidene fluoride composites containing silver nanowires
Polyvinylidene fluoride (PVDF) composites filled with in situ thermally reduced graphene oxide (TRG) and silver nanowire (AgNW) were prepared using solution mixing followed by coagulation and thermal hot pressing. Binary TRG/PVDF nanocomposites exhibited small percolation threshold of 0.12 vol % and low electrical conductivity of approximately 10(-7) S/cm. Hybridization of TRGs with AgNWs led t...
متن کاملPiezoelectric Polymeric Thin Films Tuned by Carbon Nanotube Fillers
Piezoelectric materials have received considerable attention from the smart structure community because of their potential use as sensors, actuators and power harvesters. In particular, polyvinylidene fluoride (PVDF) has been proposed in recent years as an enabling material for a variety of sensing and energy harvesting applications. In this study, carbon nanotubes (CNT) are included within a P...
متن کاملFabrication of Carbon Nanotube Polymer Actuator Using Nanofiber Sheet
Carbon nanotube polymer actuators were developed using composite nanofiber sheets fabricated by multi-walled carbon nanotubes(MWCNTs) and poly (vinylidene fluorideco-hexafluoropropylene) (PVDF-HFP). Nanofiber sheets were fabricated by electrospinning method. The effect of flow rate and polymer concentration on nanofiber formation were verified for optimum condition for fabricating nanofiber she...
متن کامل