Modeling Water-in-Oil Emulsion Formation Using Fuzzy Logic
نویسندگان
چکیده
Yildiz Technical University, Faculty of Civil Engineering, Department of Environmental Engineering, 34220 Davutpasa, Esenler, Istanbul, Turkey Tel.: +90 212 383 5376, Fax: +90 212 383 5358 E-mail: [email protected]; [email protected] Spill Science, 1717 Rutherford Point, S.W. Edmonton, Alberta, Canada T6W 1J6 Tel.: 780 989 6059, Fax: 780 433 6444 E-mail: [email protected] (Merv Fingas) Emergencies Science and Technology Division, Environment Canada, Ottawa, Ontario, Canada K1A 0H3 Tel.: 613 998 9622, Fax: 613 991 9485 E-mail: [email protected] (Ben Fieldhouse)
منابع مشابه
Modeling and Simulation of High Power Ultrasonic Process in Preparation of Stable Oil-in-Water Emulsion
The aims of this research are to study application of high power ultrasound in preparation of stable oil-in-water emulsion. The effect of pH, ionic strength, pectin, Guar gum, lecithin, egg yolk, and xanthan gum as well as the time of sonication, temperature and viscosity of oil-water mixture on the specific surface area and size of droplets, and creaming index of the emulsion samples was inves...
متن کاملCombustion of Water-in-Oil Emulsion Layers Supported on Water
In situ combustion of a water-in-oil emulsion layer supported on water is a complex process. In this paper, the combustion process of water-in-oil emulsion layers floating on top of a water body, as in the case of in situ burning of oil spilled at sea that has turned into emulsion, is modeled by using comprehensive mathematical treatment, and the results are compared with data obtained in our l...
متن کاملFormation of water-in-oil emulsions and application to oil spill modelling.
Water-in-oil mixtures were grouped into four states or classes: stable, mesostable, unstable, and entrained water. Of these, only stable and mesostable states can be characterized as emulsions. These states were established according to lifetime, visual appearance, complex modulus, and differences in viscosity. Water content at formation was not an important factor. Water-in-oil emulsions made ...
متن کاملPickering Emulsion Polymerization of Styrene-co-butyl Acrylate Nanoparticles by Using Cloisite Na+ as Surfactant
Cloisite Na+was used as a solid surfactant (stabilizer) in Pickering emulsion polymerization of styrene-co-butyl acrylate in presence of oil soluble initiator, azobisisobutyronitrile (AIBN) and water soluble initiator, potassium persulfate (KPS). Fourier transform infrared (FTIR) spectrum approved the corporation of Cloisite Na+ layers within the polymer matrix. Effect of clay content was a...
متن کاملBreaking of Oil -Water Emulsion for the Improvement of Oil Recovery Operations in the Niger Delta Oilfields
Emulsified water is generally present in crude oil as a result of mixing occurring during production operations. The formation of emulsion leads to problems in production and also transportation. Therefore the need to break oil/water emulsions system through demulsification process using chemical surfactants for improved oil recovery operations. Selected cationic surfactants were effective in s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Multiple-Valued Logic and Soft Computing
دوره 18 شماره
صفحات -
تاریخ انتشار 2012