Forced Response of an Electromagnetic Harmonic Movable Tooth Drive System to Current Excitation
نویسندگان
چکیده
In this study, the authors proposed an electromagnetic harmonic movable tooth drive system. , The forced response equation of the drive system to exciting currents was developed. Using this equation, the forced responses of the drive system to exciting currents were investigated. The results show that the forced responses of the drive system to the exciting currents were affected by mechanical and electric parameters. To reduce the vibrating amplitudes, smaller coil current, flexible ring radius, and average static displacement of the flexible ring, increased thickness of the flexible ring, clearance between the flexible ring and coils, and coil pole pair number should be taken into account. The results can be used for designing the system and further study of the dynamics performance of the drive system.
منابع مشابه
Free Vibration for an Electromagnetic Harmonic Movable Tooth Drive System
The authors proposed an electromagnetic harmonic movable tooth drive system which is an electromechanical coupled system where the coupled dynamics controls its overall operating behavior. However, the coupled dynamics of such a system was not found in the literature. In this paper, an electromechanical coupled dynamics equation of the flexible ring subjected to electromagnetic force is present...
متن کاملDesign and Production of a Pneumatic Moving Exciter for Determination of Vibration Behavior of Structures in Variable Frequencies
Determination and analysis of vibration behavior of structures for at least first few natural frequencies and mode shapes needs several sensors to be connected at different non node points and exciting the structure at one point. Other method for determination of first few mode shapes is to excite several points of the structure at once and sensing the response from one point. Both methods nee...
متن کاملResearch on the Temperature Characteristics of Movable Tooth Trans- mission Motor of Electromagnetic Harmonic
Based on the heat transfer characteristics of electromagnetic harmonic movable tooth transmission motor, this paper adopted the finite element method to establish a three-dimensional temperature field model for numerical calculation on the basis of four basic assumptions. It analyzed the heat loss and gave out the functional to calculate the temperature field within each medium and obtain the t...
متن کاملAn Analytical Solution on Size Dependent Longitudinal Dynamic Response of SWCNT Under Axial Moving Harmonic Load
The main purposes of the present work are devoted to the investigation of the free axial vibration, as well as the time-dependent and forced axial vibration of a SWCNT subjected to a moving load. The governing equation is derived through using Hamilton's principle. Eringen’s nonlocal elasticity theory has been utilized to analyze the nonlocal behaviors of SWCNT. A Galerkin method based on a clo...
متن کاملSpeed Control of A Three Phase Current Forced Synchronous Machine Drive Based on A Simple Method
In this paper, a new method is proposed for the speed control of a three-phase current forced synchronous machine drive. This metohd is based on the use of an approximate constant commutation safety margin angle in the output thyristor bridge of the drive system as well as on the compenastion of stator magnetization reaction. The commutation process in the output converter of the machine driv...
متن کامل