Shooting Type Polishing Machine
نویسندگان
چکیده
a rahalt-chromium (Co-Cr) alloy using a centrifugal shooting type polishing machine. In tha present work, we examined the effects of the texture of polishing particle and polishing time on the surface roughness of Co-Cr alloy cast specimens. Nine differcnt textures of polishing par'ticle were investigated wiLh respect to core material and paTticle abrasiveness: three (lifferent elastic body ceres (core A, hard chloroprene rubber; core B, soi't chloroprene rubber; core C, natural rubber) and three diffet'ent green carborundum powders as abrasives (#800, #3000, and #6000). Polishing was performed under a fixed
منابع مشابه
Influence of shooting angle of polishing particle on surface roughness of a cobalt-chromium alloy using a centrifugal shooting type polishing machine.
The centrifugal shooting type polishing machine is a recently developed apparatus that seeks to improve the efficiency and environment of polishing removable prostheses. In an attempt to optimize the effectiveness of this apparatus, this study examined the influence of the shooting angle of polishing particle on the surface roughness of cobalt-chromium alloy casting specimens. Polishing was per...
متن کاملDevelopment of precision polishing machine based on hexapod
Increasing demand on mass production of high precision parts, has pushed the precision manufacturing industry to develop relatively low cost, reliable precision finishing processes to meet market requirements. A gap within the provision of low cost polishing processes has been identified; namely parts with a radius of curvature less than 10mm will be increasingly present in new mass produced pr...
متن کاملMethodology and Adjustment of the Test for Determining the Polishing Difficulty Degree of Hardened Steel Surfaces, Previously Obtained by High- Speed Milling Processes
In the moulds and dies manufacturing it is important to reduce the manual polishing time after end milling processes. The polishing difficulty is related to surface topography shape and roughness values obtained in the previous end milling processes. It is interesting to develop a methodology and a test to evaluate the polishing difficulty. The aim of the present work is to establish a methodol...
متن کاملThe polishing process of advanced ceramic balls using a novel eccentric lapping machine
The finishing process of advanced ceramic balls can be divided into two steps. The first step is lapping in which most of the stock from the ball is removed at a higher material removal rate. The second step is polishing in which the required ball surface roughness, roundness, dimensional and geometric accuracy are achieved. In polishing, the abrasive particle size is ≤ 1 μm, and the load and s...
متن کاملThe application of Taguchi approach to optimise the processing conditions on bonnet polishing of CoCr alloys
This paper applied the Taguchi approach to investigate the effects of polishing parameters to obtain the optimal processing conditions for CoCr alloy polishing using a multiaxis CNC controlled corrective polishing machine. The polishing medium used was 1m diamond paste with a Microcloth(polishing cloth). Surface finish parameter Sa was chosen as the criterion for process optimization. The exper...
متن کامل