The Design of Accurate Micro-compression Experiments
نویسندگان
چکیده
We investigate (via finite-element analyses) the factors that may affect the accuracy of micro-compression measurements (see, e.g., Uchic et al. [Uchic MD, Dimiduk DM, Florando JN, Nix WD. Science 2004;305:986]). Based on these simulations, we suggest guidelines for the development of accurate micro-compression experiments in terms of fillet to post radius ratio, post aspect ratio, post taper, and system alignment. 2005 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
منابع مشابه
Mechanical Behavior of Concrete, Made with Micro-Nano Air Bubbles
Nano materials have been widely used in laboratory and industrial scales in order to improve various properties of concrete and concrete mixture. The mainstream practice of the researches in this field is to add metallic nano-particles into the concrete mixture. The present research focuses on adding Micro-Nano Air Bubbles (MNAB) into water before mixing it with aggregate and cement mixtures. I...
متن کاملModelling of Suddenly Expanded Flow Process in Supersonic Mach Regime using Design of Experiments and Response Surface Methodology
The present work is an attempt to model, analyze, and control the flow at the base of an abruptly expanded circular duct by using design of experiments (DOE) and response surface methodology (RSM). Tiny-jets in the form of orifice were positioned at an interval of 900, 6.5 mm from the primary axis of the main jet of the nozzle. Experiments were conducted to measure two responses namely, base pr...
متن کاملCorrecting the stress-strain curve in hot compression test using finite element analysis and Taguchi method
In the hot compression test friction has a detrimental influence on the flow stress through the process and therefore, correcting the deformation curve for real behavior is very important for both researchers and engineers. In this study, a series of compression tests were simulated using Abaqus software. In this study, it has been employed the Taguchi method to design experiments by the factor...
متن کاملNon-linear mechanical behavior of the elastomer polydimethylsiloxane (PDMS) used in the manufacture of microfluidic devices
Polydimethylsiloxane (PDMS) is the elastomer of choice to create a variety of microfluidic devices by soft lithography techniques (e.g., [1], [2], [3], [4]). Accurate and reliable design, manufacture, and operation of microfluidic devices made from PDMS, require a detailed characterization of the deformation and failure behavior of the material. This paper discusses progress in a recently-initi...
متن کاملDistinct element modelling of the mechanical behaviour of intact rocks using voronoi tessellation model
This paper aims to study the mechanical behaviour and failure mechanism of intact rocks under different loading conditions using the grain based model implemented in the universal distinct element code (UDEC). The grain based numerical model is a powerful tool to investigate complicated micro-structural mechanical behaviour of rocks. In the UDEC grain based model, the intact material is simulat...
متن کامل