Research on a Modified Smith Predictive Control Scheme of Main Steam Temperature of Circulating Fluidized Bed
نویسندگان
چکیده
In order to solve the current difficulties of modeling for designing Intelligent Service Mobile Robot (ISMR), a new modeling method based on metasynthesis is proposed from the macro and micro levels. And the system analysis and design agent-oriented based on POMDP are provided in the same time. Finally, the two case studies are given and the experimental results have shown efficiency and rationality of this modeling method.
منابع مشابه
Steam reforming of propane over Ni-K/CeO2-Al2O3 catalyst in fluidized- and fixed-bed reactors under low steam to propane ratio
Fluidized bed was employed to investigate propane steam reforming over Ni-K/CeO2-Al2O3 catalyst. The catalyst was characterized by XRD, SEM, TG/DTA, and N2 adsorption-desorption tests. Effects of promoters, space velocity, temperature, and steam/propane (S/C) ratio on propane conversion, H2 yield, H2/CO ratio, and stability were studied and discussed. The experiments were carried out under cond...
متن کاملDecentralized Advanced Model Predictive Controller of Fluidized-Bed for Polymerization Process
The control of fluidized-bed operations processes is still one of the major areas of research due to the complexity of the process and the inherent nonlinearity and varying dynamics involved in its operation. There are varieties of problems in chemical engineering that can be formulated as NonLinear Programming (NLPs). The quality of the developed solution significantly affects the performa...
متن کاملInvestigation of a Cold Model of Internally Circulating Fluidized Bed with Draft Tube to be used as a two-Zone Fluidized Bed Reactor
In this research, a cold model of internally circulating fluidized bed is investigated. The aim is to find the effects of some of the operating parameters on the performance of the reactor. Experiments were carried out in a glass column (30 mm i.d. and 25 cm height) with a centrally located draft tube (11 mm i.d. and 5 or 7 cm height). The bed was loaded with white silica particles (dp = 0.15 -...
متن کاملTwo Phase Modeling of Char Combustion in a Circulating Fluidized Bed Reactor Using ASPEN PLUS
In this paper, combustion of char in the riser of circulating fluidized bed was modeled using ASPEN PLUS. Since physical and chemical phenomena are involved in the process, the model integrates the two-phase hydrodynamic sub-model with the reaction sub-model derived from the literature. In the proposed model, the fluidized bed is divided into several sections and the behavior of each section wa...
متن کاملEffect of Novel Swirl Distributor Plate on Hydrodynamics of Fluidized Bed Gasifier
The main advantage of a fluidized bed is its capability in excellent gas-fuel mixing. However, due to the lacks of gas radial momentum, its lateral mixing of gas-solid is not adequate. Therefore, this research is focused on fluidized bed hydrodynamics enhancement using the modified gas distributor plate design. For getting an optimum fluidized bed hydrodynamics prediction, three different class...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012