Influence of 1 wt-% addition of Ni on structural and mechanical properties of ferritic ductile irons
نویسندگان
چکیده
To cite this version: Lacaze, Jacques and Larrañaga, Peio and Asenjo, Iker and Suarez, Ramon and Sertucha, Jon Influence of 1 wt-% addition of Ni on structural and mechanical properties of ferritic ductile irons. (2012) Materials Science and Technology, Vol. 28 (n° 5). pp. 603-608. ISSN 0267-0836 Open Archive Toulouse Archive Ouverte (OATAO) OATAO is an open access repository that collects the work of Toulouse researchers and makes it freely available over the web where possible.
منابع مشابه
Structural and Mechanical Characterization of Austempered Cu - Sn Ductile Iron Alloys
The effect of heat treatment and alloying elements of copper and tin on the microstructure and mechanical properties of austempered ductile cast iron alloys is investigated. The austenitizing temperature of 890°C, the isothermal transformation (austempering) temperatures of 285, 335 and 375°C, and austempering times of 15, 30, 75 and 150 minutes are studied. The alloying elements of copper and ...
متن کاملGraphite Phase Formation in Al Alloyed Ductile Irons
The influence of aluminum, within the range of 0.08 - 6.16 wt.%, on the microstructure and hardness of as-cast ductile cast iron has been studied. A number of irons of different composition have been made by green sand casting and gravity die casting of appropriate design to provide the experimental materials. It has been found that Al addition and higher cooling rates in permanent mould castin...
متن کاملInfluence of Cu and Ni on the Microstructure and Mechanical Properties of an HSLA Steel
In this research the role of alloying elements on the microstructure and mechanical properties of an as cast and hot rolled high strength low alloy (HSLA) steel was studied. Different compositions with different amount of copper in the presence of nickel, hot rolled and quenched in oil. Tensile test, hardness test, scanning electron microscope (SEM) and optical microscope (OM) were used to eval...
متن کاملCarbide Precipitation in the Microstructures of Austempered Ductile Irons Containing 0.48% and 4.88% Al
The influence of aluminium on the microstructure of austempered ductile cast iron (ADI) has been studied. The presence of well distributed graphite in the matrix, and a relatively high volume fraction of retained austenite are responsible for the good mechanical properties of the Aluminium alloyed austempered ductile irons including excellent wear resistance, higher resistance to thermal shock,...
متن کاملInfluence of Composition and Austempering Temperature on Machinability of Austempered Ductile Iron
Present investigations involve a systematic study on the machinability of austempered ductile irons (ADI) developed from four commercially viable ductile irons alloyed with different contents of 0, 0.1, 0.3 and 0.6 wt.% of Ni. The influence of Ni content, amount of retained austenite and hardness of ADI on machining behavior has been conducted systematically. Austempering heat treatment was car...
متن کامل