Modeling of ship exhaust in the MBL
نویسندگان
چکیده
Modeling the chemical effects of ship exhaust in the cloud-free marine boundary layer R. von Glasow, M. G. Lawrence, R. Sander, and P. J. Crutzen Max-Planck-Institut für Chemie, Atmospheric Chemistry Division, PO Box 3060, 55020 Mainz, Germany 2 Center for Atmospheric Sciences, Scripps Institution of Oceanography, University of California at San Diego, La Jolla, CA 92093-0221, USA now at Scripps Received: 19 April 2002 – Accepted: 6 May 2002 – Published: 7 June 2002 Correspondence to: R. von Glasow ([email protected])
منابع مشابه
Modeling and simulation of the acoustic behavior of a muffler in a passenger car exhaust system
Muffler is one of the main components of an automotive exhaust system, which reduces the noise of the exhaust system. In this paper, modeling and simulation of the acoustic behavior of a muffler is presented with the aid of an engineering software. For this purpose, firstly, an analytical model is presented to evaluate the sound transmission loss in cylindrical shells based on Sander's theory....
متن کاملModeling of Combustion and Carbon Oxides Formation in Direct Injection Diesel Engine
When looking at the effects of diesel engine exhaust on the environment, it is important to first look at the composition of the exhaust gases. Over 99.5% of the exhaust gases are a combination of nitrogen, oxygen, carbon dioxide, and water. With the exception of carbon dioxide, which contributes about 5% of the total volume, the diesel engine exhaust consists of elements which are part of...
متن کاملModel identification and dynamic analysis of ship propulsion shaft lines
Dynamic response analysis of mechanical structures is usually performed by adopting numerical/analytical models. Finite element (FE) modeling as a numerical approach plays an important role in dynamic response analysis of complex structures. The calculated dynamic responses from FE analysis are only reliable if accurate FE models are used. There are many elements in real mechanical structures w...
متن کاملSimple Kinetic Modeling of Selective Reduction of Nitric Oxide in Diesel Exhaust Over Cu-Zn/ZSM-5 Monolithic Catalyst
متن کامل
CFD Modeling Study of High Temperature and Low Oxygen Content Exhaust Gases Combustion Furnaces
This paper reports a CFD modeling study on the possibility of using high temperature and low oxygen content exhaust gases as oxidant for combustion in an industrial furnace by a written computer program. Under these conditions,the predicted results for the flow and heat transfer properties are compared with those under the several cases of conventional and highly preheated...
متن کامل