Design and Implementation of Hybrid Light and Microwave Switches Based on Wavelength Selective Switch for Future Satellite Networks
نویسندگان
چکیده
A hybrid switching node structure with light and microwave links is proposed, which is applicable to the future data relay satellite systems, aiming at the development trend of coexistence of lightlink and microwave-link in the future. An experimental system for the light and microwave hybrid switching node based on wavelength selective optical switches (WSS) and optical transceiver modules, is established. It is shown by our experiment that this hybrid switching node can realize the dynamic bandwidth allocation and wavelength routing while the bit error rate of light link is less than 10−12, which provides a method for solving the hybrid switching problem of light-link and microwave-link on the future data relay satellite systems.
منابع مشابه
Design and Implementation of a New Switch-Diode based Single Source Multilevel Inverter Topology
Multilevel inverters are a new generation of DC-AC converters at medium and high voltage and power levels. These converters have made great strides in the use of industrial applications compared to conventional two-level inverters due to lower harmonic distortion, filter size, EMI and dv/dt. Besides these merits, some disadvantages can be mentioned such as more power electronics devices and com...
متن کاملSimulation and Design of an Organic Quantum Film Electrooptic Switch
In this paper the simulation and design of a quantum-film electro-optic switch is considered. This photonic device, is made from a new organic dipolar material called MNA or 2-methyl-4 nitroaniline, which possesses a high merit in comparison with it's inorganic counterparts (e.g. LiNbO3, GaAs, InSb, Quartz, etc). Montecarlo method is used to simulate the photon-it-electron interaction in this m...
متن کاملSelf-Routing Nonblocking WDM Switches Based on Arrayed Waveguide Grating
Arrayed waveguide grating (AWG) is a promising technology for constructing high-speed large-capacity WDM switches, because it can switch fast, is scalable to large size and consumes little power. To take the full advantage of high-speed AWG, the routing control of a massive AWG-based switch should be as simple as possible. In this paper, we focus on the self-routing design of AWG-based switches...
متن کاملDesign of Arrayed Waveguide Grating based Optical Switch for High Speed Optical Networks
This paper demonstrates the design of an Arrayed Waveguide Gratings (AWG) based optical switch. In the design both physical and network layer analysis is performed. The physical layer power and noise analysis is done to obtain Bit Error Rate (BER). This has been found that at the higher bit rates, BER is not affected with number of buffer modules. Network layer analysis is done to obtain perfor...
متن کاملA Novel Concept for Reconfigurable Frequency Selective Surfaces Based on Silicon Switches
The authors describe a novel concept for reconfigurable frequency selective surfaces based on metallic dipole and cross-dipole elements connected by switches on an exposed silicon substrate. As the conductivity of silicon can be varied over a large dynamic range by photonic excitation, it represents a good candidate substrate material for producing effective switches. The genetic algorithm was ...
متن کامل