Toward a 10,000-element B-Mode Experiment
نویسنده
چکیده
In this paper, we introduce two compact, large-throughput CMB polarimeter designs (POLAR1 and BICEP3). These pathfinder experiments will pave the way for a comprehensive multi-frequency South Pole B-mode survey that, when jointly analyzed with arcminute-scale polarization data, can conclusively answer the question whether there is an appreciable fraction (> 1%) of the primordial perturbations in the form of tensor modes (gravitational waves).
منابع مشابه
نانولوله‌های کربنی آلاییده به عناصر سه ظرفیتی با استفاده از طیف‌سنجی پس‌پراکندگی رامان
In this paper by using DC arc discharge method and acetylene gas, as the carbon source, and nitrogen, as the carrier gas, canrbon nanotubes, CNTs, doped with trivalent element boron, B, have been produced. The deposited CNTs on the cathod electrod, which have structural doped properties to boron element, have been collected and after purification have been investigated by back-scattering Raman...
متن کاملPerformance of Rotating Solar Still with Rotating External Reflectors (RESEARCH NOTE)
In this research, a rotating solar still that uses external bottom reflectors was experimentally investigated. The solar still and reflectors have the capability to shift their angle with respect to the south and the reflectors have the capability to shift their angle with respect to the horizon. The experiment has been performed in both fixed and rotating states. For the fixed state the solar ...
متن کاملA Special Finite Element Method Based on Component Mode Synthesis
The goal of our paper is to introduce basis functions for the finite element discretization of a second order linear elliptic operator with rough or highly oscillating coefficients. The proposed basis functions are inspired by the classic idea of component mode synthesis and exploit an orthogonal decomposition of the trial subspace to minimize the energy. Numerical experiments illustrate the ef...
متن کاملPrediction of Crack Initiation Direction for Inclined Crack Under Biaxial Loading by Finite Element Method
This paper presents a simple method based on strain energy density criterion to study the crack initiation angle by finite element method under biaxial loading condition. The crack surface relative displacement method is used to eliminate the calculation of the stress intensity factors which are normally required. The analysis is performed using higher order four node quadrilateral element. The...
متن کاملExtended finite element simulation of crack propagation in cracked Brazilian disc
The cracked Brazilian disc (CBD) specimen is widely used in order to determine mode-I/II and mixed-mode fracture toughness of a rock medium. In this study, the stress intensity factor (SIF) on the crack-tip in this specimen is calculated for various geometrical crack conditions using the extended-finite element method (X-FEM). This method is based upon the finite element method (FEM). In this m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2013