Alcohol cosurfactants in hydrate antiagglomeration.
نویسندگان
چکیده
Because of availability, as well as economical and environmental considerations, natural gas is projected to be the premium fuel of the 21st century. Natural gas production involves risk of the shut down of onshore and offshore operations because of blockage from hydrates formed from coproduced water and hydrate-forming species in natural gas. Industry practice has been usage of thermodynamic inhibitors such as alcohols often in significant amounts, which have undesirable environmental and safety impacts. Thermodynamic inhibitors affect bulk-phase properties and inhibit hydrate formation. An alternative is changing surface properties through usage of polymers and surfactants, effective at 0.5 to 3 weight % of coproduced water. One group of low dosage hydrate inhibitors (LDHI) are kinetic inhibitors, which affect nucleation rate and growth. A second group of LDHI are antiagglomerants, which prevent agglomeration of small hydrate crystallites. Despite great potential, work on hydrate antiagglomeration is very limited. This work centers on the effect of small amounts of alcohol cosurfactant in mixtures of two vastly different antiagglomerants. We use a model oil, water, and tetrahydrofuran as a hydrate-forming species. Results show that alcohol cosurfactants may help with antiagglomeration when traditional antiagglomerants alone are ineffective. Specifically, as low as 0.5 wt. % methanol cosurfactant used in this study is shown to be effective in antiagglomeration. Without the cosurfactant there will be agglomeration independent of the AA concentration. To our knowledge, this is the first report of alcohol cosurfactants in hydrate antiagglomerants. It is also shown that a rhamnolipid biosurfactant is effective down to only 0.5 wt. % in such mixtures, yet a quaternary ammonium chloride salt, i. e., quat, results in hydrate slurries down to 0.01 wt. %. However, biochemical surfactants are less toxic and biodegradable, and thus their use may prove beneficial even if at concentrations higher than chemical surfactants.
منابع مشابه
Effects of Surfactants on the Properties of Mortar Containing Styrene/Methacrylate Superplasticizer
The physical and mechanical properties of mortar containing synthetic cosurfactants as air entraining agent are investigated. The cosurfactants consist of a combination of 2% dodecyl benzene sodium sulfonate (DBSS) and either 1.5% polyvinyl alcohol (PVA) or 1.5% polyoxyethylene glycol monomethyl ether (POE). Also these cosurfactants were used to prepare copolymers latex: styrene/butyl methacryl...
متن کاملExperimental Determination of the Temperature Suppression in Formation of Gas Hydrate in Water Based Drilling Mud
The aqueous mixtures of light gas molecules under low-temperature and high-pressure conditions are candidates to form gas hydrate clathrates. The formation of gas hydrate may lead to various problems and extra charges in natural gas production and processing. The presence of hydrate crystals forming a stable solid phase can potentially block the wells, pipes, and process facilities. To avoid su...
متن کاملThe effect of cosurfactants on sodium dodecyl sulfate micellar structures at a graphite surface
Sodium dodecyl sulfate (SDS) self assembles at hydrophobic graphite surfaces forming linear parallel hemicylinders with approximately 5 nm spacing between adjacent hemicylinders. In this paper, we report the effect of cosurfactants on the SDS surface micelle structures. It is known from the literature that cosurfactants influence the relaxation times of bulk phase micelles. Specifically, the re...
متن کاملMicroemulsion system for topical delivery of thai mango seed kernel extract: development, physicochemical characterisation and ex vivo skin permeation studies.
A microemulsion system containing Thai mango seed kernel extract (MSKE, cultivar "Fahlun") was developed and characterised for the purpose of topical skin delivery. The MSKE-loaded microemulsions were prepared by using the spontaneous emulsification method. Isopropyl myristate (IPM) was selected as the oil phase. A polyoxyethylene sorbitan monooleate and sorbitan monododecanoate (1:1, w/w) syst...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The journal of physical chemistry. B
دوره 112 34 شماره
صفحات -
تاریخ انتشار 2008