Characteristics of Ni–Ir and Pt–Ir hard coatings surface treated by pulsed Nd:YAG laser
نویسندگان
چکیده
منابع مشابه
بررسی مقدماتی اثر لیزر Nd:YAG در مسدود نمودن توبول های عاجی به وسیله میکروسکوپ الکترونی
The purpose of this study was to evaluate the effect of pulsed Nd:YAG laser on the dentin surface by scanning electron microscope (SEM) in order to determine the optimum time and power of radiation to seal the exposed dentinal tubules. Horizontal sections were taken from newly extracted impact third molar teeth. Smear layers from the dentin surfaces were removed by phosphoric acid and all sampl...
متن کاملAnalysis of Cracks in the Pulsed Nd:YAG Laser Welded Joint of Nickel-Based Superalloy
The weldability of GTD-111 nickel-based superalloy by pulsed Nd:YAG laser welding with an average power of 250 W was studied, and the microstructural evolution and cracking characteristics were also investigated. The solidification cracking of the fusion zone (FZ) and the intergranular liquation cracking in the heat affected zone (HAZ) were observed in the joint. Solidification cracking was cau...
متن کاملThe effect of surface roughness on 1050 aluminum alloy weld profile welded by pulsed Nd:YAG laser
Surface roughness in the welding processes is one of the important parameters in the laser welded metal connections which affects laser beam absorption directly. When the laser beam is irradiated to the surface of the base metal, the surface roughness plays an important role in the amount of beam absorption and the amount of melting achieved and directly affects the penetration depth. The main ...
متن کاملComparison of the Effect of Nd:YAG Laser and Sandblasting on Shear Bond Strength of a Commercial Ni-Cr Alloy to Porcelain
Introduction: Failures might occur at metal‒porcelain interfaces as a problem with metal‒ceramic restorations even with the application of airborne-particle abrasion technique. This study was undertaken to evaluate the effect of Nd:YAG laser treatment on the bond strength of porcelain fused to metal. Methods: Twenty-four cylindrical specimens (4 mm in diameter and 4 mm in height) were made of ...
متن کامل