Cellulose Based Rubber Nanocomposites
نویسندگان
چکیده
This chapter gives an introduction on the general aspects of cellulose, natural rubber and their bionanocomposites. A brief literature review on what has been done so far on the cellulose, natural rubber nanocomposites research area is also included in this chapter. This chapter also describes the structure, properties and characterization of cellulose as a biobased nanomaterial in natural rubber.
منابع مشابه
Cellulose nanocrystal reinforced oxidized natural rubber nanocomposites.
Natural rubber (NR) latex particles were oxidized using KMnO4 as oxidant to promote the insertion of hydroxyl groups in the surface polyisoprene chains. Different degrees of oxidation were investigated. Both unoxidized and oxidized NR (ONR) latex were used to prepare nanocomposite films reinforced with cellulose nanocrystals (CNCs) by casting/evaporation. The oxidation of NR was carried out to ...
متن کاملAntibacterial Activity and Conductivity Properties of Nanocomposites based on Cellulose Acetate Nanofibers and Copper Nanoparticles
in this work, nanocomposites comprising copper nanoparticle in cellulose acetate (CA)matrices have been prepared. In this manner, Copper nanoparticles prepared by its saltreduced by sodium borohydride at various concentration. Then this nanoparticle solution wasmixed with polymer solution and electrospun by electrospinning device. The abovenanocomposite has been successfully detected by SEM, ED...
متن کاملNanoscale visualization and multiscale mechanical implications of bound rubber interphases in rubber–carbon black nanocomposites†
The concept of a ‘‘bound rubber’’ phase extending over nanometre-scale distances from the interface of rubber-particle nanocomposites is generally accepted. However, the thickness and elastic properties of this interphase have not been confirmed by direct experimental observation. Here, we demonstrate the existence of bound rubber in hydrogenated nitrile butadiene rubber (HNBR)–carbon black com...
متن کاملImproved curing conditions and mechanical/chemical properties of Nitrile Butadiene Rubber Composites Reinforced with Carbon Based Nanofillers
Multiwall carbon nanotubes (MWCNTs) and carbon nanofibers (CNFs) with contents ranging from 1 to 10 phr (part per hundred parts of rubber) were selected and then characterized to reinforce acrylonitrile butadiene rubber (NBR) based composites. Fabrication of nanocomposites were done by a novel procedure and structural analysis along with variety of mechanical and chemical tests, according to th...
متن کاملThermoreversibly Cross-Linked EPM Rubber Nanocomposites with Carbon Nanotubes
Conductive rubber nanocomposites were prepared by dispersing conductive nanotubes (CNT) in thermoreversibly cross-linked ethylene propylene rubbers grafted with furan groups (EPM-g-furan) rubbers. Their features were studied with a strong focus on conductive and mechanical properties relevant for strain-sensor applications. The Diels-Alder chemistry used for thermoreversible cross-linking allow...
متن کامل