Comparison of Techniques for Strain Measurements in CuInSe2 Absorber Layers of Thin-film Solar Cells
نویسندگان
چکیده
1. Helmholtz-Zentrum Berlin für Materialien und Energie GmbH, Hahn-Meitner-Platz 1, 14109 Berlin, Germany 2. Freie Universitaet Berlin, Institute of Geological Sciences, Malteserstr. 74-100, 12249 Berlin, Germany 3. Department of Materials, University of Oxford, Parks Road, Oxford OX1 3PH, U.K. 4. European Synchrotron Radiation Facility, BP 220, Grenoble Cedex, France 5. Federal Institute for Materials Research and Testing, Richard-Willstätter-Str. 11, 12205 Berlin, Germany
منابع مشابه
Improving the optical properties of thin film plasmonic solar cells of InP absorber layer using nanowires
In this paper, a thin-film InP-based solar cell designed and simulated. The proposed InP solar cell has a periodic array of plasmonic back-reflector, which consists of a silver layer and two silver nanowires. The indium tin oxide (ITO) layer also utilized as an anti-reflection coating (ARC) layer on top. The design creates a light-trapping structure by using a plasmonic back-reflector and an an...
متن کاملOptimization of Annealing Process for Totally Printable High-current Superstrate CuInS2 Thin-Film Solar Cells
Planar superstrate CuInS2 (CIS) solar cell devices are fabricated using totally solution-processed deposition methods. A titanium dioxide blocking layer and an In2S3 buffer layer are deposited by the spray pyrolysis method. A CIS2 absorber layer is deposited by the spin coating method using CIS ink prepared by a 1-butylamine solvent-based solution at room temperature. To obtain optimum annealin...
متن کاملThe Effect of Doping and the Thickness of the Layers on CIGS Solar Cell Efficiency
The main problemswith the use of fossil fuels is the restrictions on their access and the detrimental consequences of their use which causes a threat to human health and quality of life. Consequently, the use of other energy sources has become necessary. Renewable Energy as a permanent and clean energy source is an answer to this problem. One such energy source includes photovoltaic solar energ...
متن کاملCuIn(S,Se)(2) thin films prepared from a novel thioacetic acid-based solution and their photovoltaic application.
Low-cost and high-yield preparation of CuInSe2 films is the bottleneck for promising CuInSe2-based thin film solar cells. Here, we developed a simple, safe and cost-effective method using thioacetic acid to fabricate the absorber films of CuIn(S,Se)2 (CISSe). Dissolution of Cu2O and In(OH)3 in thioacetic acid was attributed to the strong coordination ability of S. The adhesive precursor solutio...
متن کاملInvestigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application
CdTe thin films with 2.8 µm thickness were deposited by electron beam evaporation method. X-ray diffraction, scanning electron microscopy, UV-Vis-NIR spectroscopy and atomic force microscopy (AFM) were used to characterize the films. The results of AFM analysis revealed that the CdTe films have uniform surface. CdTe thin films were heat-treated by SnCl2 solution. Structural analysis using XRD s...
متن کامل