Simplified Correlations for Hydrocarbon Gas Viscosity And Gas Density — Validation and Correlation of Behavior Using a Large-Scale Database
نویسندگان
چکیده
This paper was selected for presentation by an SPE Program Committee following review of information contained in an abstract submitted by the author(s). Contents of the paper, as presented, have not been reviewed by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the Society of Petroleum Engineers, its officers, or members. Papers presented at SPE meetings are subject to publication review by Editorial Committees of the Society of Petroleum Engineers. Electronic reproduction, distribution, or storage of any part of this paper for commercial purposes without the written consent of the Society of Petroleum Engineers is prohibited. Permission to reproduce in print is restricted to an abstract of not more than 300 words; illustrations may not be copied. The abstract must contain conspicuous acknowledgment of where and by whom the paper was presented. Abstract The focus of this work is the behavior of gas viscosity and gas density for hydrocarbon gas mixtures. The viscosity of hydrocarbon gases is a function of pressure, temperature, density, and molecular weight, while the gas density is a function of pressure, temperature, and molecular weight. This work presents new approaches for the prediction of gas viscosity and gas density for hydrocarbon gases over practical ranges of pressure, temperature and composition. These correlations can be used for any hydrocarbon gas production or transportation operations. In this work we created an extensive database of measured gas viscosity and gas density (>5000 points for gas viscosity and >8000 points for gas density). This database was used to evaluate existing models for gas viscosity and gas density. In this work we provide new models for gas density and gas viscosity, as well as optimization of existing models using this database. The objectives of this research are: To create a large-scale database of measured gas viscosity and gas density data which contains all of the information required to establish the applicability of various models for gas density and gas viscosity over a wide range of pressures and temperatures. To evaluate a number of existing models for gas viscosity and gas density. To develop new models for gas viscosity and gas density using our research database — these models are proposed, validated, and presented graphically. For this study, we created a large-scale database of gas properties using existing sources available in the literature. Our database includes: …
منابع مشابه
Measuring the Density and Viscosity of Carbonated Aqueous 35 wt% Methyldiethanolamine Solution
The density and viscosity of carbonated aqueous 35wt% methyldiethanolamine solution were experimentally measured accompanied with the solubility of CO2 at temperatures from (303.15 to 363.15) K and pressures up to 0.8 MPa using the new setup developed in our laboratory.It was observed that both density and viscosity of mixtures decrease by increasing temperature and incr...
متن کاملModeling Solubility Behavior of CO2 in [C2-mim][BF4] and [C4-mim][BF4] Ionic Liquids by sPC-SAFT Equation of State
The simplified perturbed chain statistical associating fluid theory (sPC-SAFT) Equation of State (EOS) was proposed to describe the thermodynamic properties of pure ionic liquids (ILs). A set of sPC-SAFT parameters for 2 ILs was obtained by fitting the experimental liquid densities data over a wide range of temperature at atmospheric pressure. Good agreement with experimental density data was o...
متن کاملEstimation of Gas Mixture Compressibility Factor and Viscosity based on AI and Experimental DataEstimation of Gas Mixture Compressibility Factor and Viscosity based on AI and Experimental Data
Compressibility factor and viscosity of natural gasses are of great importance in petroleum and chemical engineering. To calculate the natural gas properties in the pipelines, storage systems and reservoirs, the exact values of gas compressibility factor and viscosity are required. A new method that allows accurate determination of compressibility factor and gas viscosity for all types of: swee...
متن کاملPerformance of Biological hydrogen Production Process from Synthesis Gas, Mass Transfer in Batch and Continuous Bioreactors
Biological hydrogen production by anaerobic bacterium, Rhodospirillum rubrum was studied in batch and continuous bioreactors using synthesis gas (CO) as substrate. The systems were operated at ambient temperature and pressure. Correlations available in the literature were used to estimate the gas-liquid mass transfer coefficients (KLa) in batch reactor. Based on experimental results for the con...
متن کاملDetermination of Minimum Miscibility Pressure in Gas Injection Process by Using ANN with Various Mixing Rules
Miscible gas injection is one of the most effective enhanced oil recovery techniques and minimum miscibility pressure (MMP) is an important parameter in miscible gas injection processes. The accurate determination of this parameter is critical for an adequate design of injection equipment investment prospect. The purpose of this paper is to develop a new universal artificial neural network (U-A...
متن کامل