Microwave performance of optically controlled MESFETs

نویسندگان

  • Mohammad A. A. Alsunaidi
  • Munir A. Al-Absi
چکیده

This paper presents the characterization of illuminated high-frequency active devices using a time domain physical simulation model. The model is based on Boltztnann’s Transport Equation (BTE), which accurately accounts for carrier transport in microwave and millimeter wave devices with sub-micrometer gate lengths. Illumination effects are accommodated in the model to represent camer density changes inside the illuminated device. The simulation results are compared to available experimental records for a typical MESFET for validation purposes. The calculated y-parameters of the device show the profound effect of illumination on the microwave characteristics. These findmgs make the model an important tool for the design of active devices under illumination control.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Influence of electrode parameters on the performance of optically controlled MESFETs

The effects of electrode spacing on the optical response of illuminated MESFETs are analyzed. The analysis targets various optical performance factors including terminal photocurrent peak value, peak-time and discharge time. Whereas photocurrent peak value increases nonlinearly with electrode spacing, it was found that increasing the electrode spacing has a profound effect on the ability of the...

متن کامل

Highly doped thin-channel GaN-metal–semiconductor field-effect transistors

We report on the influence of the channel doping on dc, high frequency, and noise performance of GaN metal–semiconductor field-effect transistors ~MESFETs! grown on sapphire substrates. The devices with the channel thicknesses from 50 to 70 nm and doping levels up to 1.5310 cm were investigated. An increase in the channel doping results in the improved dc characteristics, higher cutoff, and max...

متن کامل

Cmos Compatible Soi Mesfets for Extreme Environment Electronics

Silicon-on-insulator MESFETs have been fabricated using standard CMOS process flows and their characteristics have been measured over a temperature range of –180°C to + 300°C. From the measured data a TOM3 Spice model has been extracted. The Spice model has been used to simulate a two-stage operational transconductance amplifier and a voltage controlled oscillator. The circuit simulations show ...

متن کامل

Analysis of the CW-mode optically controlled microwave switch

Optical-microwave interaction has been emphasized in optically reconfigurable antenna arrays (ORA) due to the unique advantage that transparency between the optical control signals and microwave signals makes the antenna less susceptible to jamming. One of the important parts in ORA is an optically controlled microwave switch (OMS) as synaptic elements. A gap-structure OMS has been developed as...

متن کامل

Numerical Simulation of Microwave GaAs MESFETs

A comprehensive physical model is used in a twodimensional numerical simulation of highly doped gallium arsenide MESFETs. Particular attention is paid to the formulation of the numerical schemes and boundary conditions to ensure accurate modelling. A specially formulated current continuity finite difference equation is used, which produces stable, accurate and efficient solutions, even at carri...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2003