Alloy Development through Rapid Solidification for Soft Magnetic Application
نویسندگان
چکیده
This chapter describes different rapidly solidified processing routes of soft magnetic alloys and their properties and applications in different areas. Section-2 explains the details of process mechanism. The functions of different alloying elements are discussed with the alloy design of soft magnetic alloys in section-3. The structureproperty correlation is described in section-4. Section-5 highlights different types of rapidly solidified soft magnetic alloys, like high permeability alloys, high induction alloys, Fe-6.5 wt% Si steel and GMI alloys. In the last section-6, the applications of different types of soft magnetic alloys are mentioned.
منابع مشابه
Phase-field modelling of solute trapping during rapid solidification of a Si–As alloy
The effect of nonequilibrium solute trapping by a growing solid under rapid solidification conditions is studied using a phase-field model. Considering a continuous steady-state concentration profile across the diffuse solid-liquid interface, a new definition of the nonequilibrium partition coefficient in the phase-field context is introduced. This definition leads, in particular for high growt...
متن کاملRecalescence after bulk solidification in germanium films melted by ns laser pulses
Related Articles Thermoelectric magnetic force acting on the solid during directional solidification under a static magnetic field Appl. Phys. Lett. 101, 251904 (2012) Structural features and high quasi-static strain rate sensitivity of Au49Cu26.9Ag5.5Pd2.3Si16.3 bulk metallic glass Appl. Phys. Lett. 101, 241905 (2012) First principle molecular dynamic simulation of the rapid solidification pro...
متن کاملNew development of rapid-solidified Fe-Ga sensor/actuator alloy
Rapid-solidification method was applied to make Fe-15at%Ga and Fe-17at%Ga ribbons of 100 μm thickness. These ribbons have large magnetostriction of 270 ppm, where the coercive force exhibits a maximum value. The phenomenon is related to special metallic texture, that is, the ribbon has strongly [001]-oriented textured fine columnar microstructure with grain size of 2~5 μm. The ribbon has little...
متن کاملThe Solidification Behavior of AA2618 Aluminum Alloy and the Influence of Cooling Rate
In AA2618 aluminum alloy, the iron- and nickel-rich intermetallics formed during solidification are of great effect on the mechanical properties of the alloy at both room temperature and elevated temperatures. However, the solidification behavior of the alloy and the formation mechanism of the intermetallics during solidification of the alloy are not clear. This research fills the gap and contr...
متن کاملPhase-field modelling of rapid solidification in alloy systems: Spontaneous grain refinement effects
Phase-field modelling of rapid alloy solidification, in which the rejection of latent heat from the growing solid cannot be ignored, has lagged significantly behind the modelling of conventional casting practises which can be approximated as isothermal. This is in large part due to the fact that if realistic materials properties are adopted the ratio of the thermal to solute diffusivity (the Le...
متن کامل