Analysis of a Mixed Finite Element Method for Elasto-Plastic Plates*
نویسنده
چکیده
We consider a mixed finite element method for finding approximations of the displacement and moments in a thin elastic-perfectly plastic plate. Under some weak assumptions concerning the regularity of the exact solution, we prove an error estimate for the moments.
منابع مشابه
A Finite Volume Formulation for the Elasto-Plastic Analysis of Rectangular Mindlin-Reissner Plates, a Non-Layered Approach
This paper extends the previous work of authors and presents a non-layered Finite Volume formulation for the elasto-plastic analysis of Mindlin-Reissner plates. The incremental algorithm of the elasto-plastic solution procedure is shown in detail. The performance of the formulation is examined by analyzing of plates with different boundary conditions and loading types. The results are illustrat...
متن کاملA Mixed Triangular Element for the Elasto-plastic Analysis of Kirchhoff Plates
A triangular mixed finite element model for the elasto-plastic analysis of Kirchhoff plates is presented. The proposed discretization is based on rigid in bending elements connected by means of rotational springs between the inter-element sides and constant bending moments on the influence area of each node. The continuity of the normal bending moment through the sides allows a standard Helling...
متن کاملElasto-Plastic Finite Element Evaluation of Flexible Pavements Based on Shakedown Concept
In this paper, three-dimensional elasto-plastic finite element analysis was performed on flexible pavements under vertical repeated traffic loads to evaluate their shakedown behavior. Six different pavements with different structural number (SN) were modeled and subjected to a wide range of cyclic vehicle loads. Shakedown limits were obtained considering both failure and serviceability restrain...
متن کاملElasto-plastic analysis of discontinuous medium using linearly conforming radial point interpolation method
In this paper, the linearly conforming enriched radial basis point interpolation method is implemented for the elasto-plastic analysis of discontinuous medium. The linear conformability of the method is satisfied by the application of stabilized nodal integration and the enrichment of radial basis functions is achieved by the addition of linear polynomial terms. To implement the method for the ...
متن کاملInelastic Continuum Modeling of Carbon Nanotube,s Behavior Using Finite Element Method
This paper describes a continuum model for analyzing the inelastic behavior of a single walled carbon nanotube (SWCNT) in different loading conditions. Because of limitations in using molecular dynamics (and other atomic methods) to model the failure load of the SWCNT, continuum mechanics methods are considered in this paper. Based on some experimental and theoretical results, an elasto-plastic...
متن کامل