Application of Energy-dispersive Diffraction to the Analysis of Highly Inhomogeneous Residual Stress Fields in Thin Film Structures
نویسندگان
چکیده
For residual stress evaluation in complex substrate-coating-systems, energy-dispersive (ED) diffraction with energies up to 100 keV can be applied to analyze the near interface residual stress state in the substrate, because the high energy white beam penetrates the coating completely. By the example of an Al2O3/TiCN on WC coating system we have studied the feasibility for using the coating reflections being stored in the ED diffraction patterns together with the substrate diffraction lines to analyze the residual stress state in individual sublayers the coating system consists of. The results indicate that the ED method is suitable to detect even steep intralayer stress gradients, if the diffraction conditions are adapted to the coating geometry.
منابع مشابه
Enhanced Photocatalytic Activity of Sol-Gel Derived Coral-like TiO2 Nanostructured Thin Film
To enhance photocatalytic degradation of organic pollutants, coral-like TiO2 nanostructured thin films were chemically synthesized through the sol-gel method. The fabricated thin films were characterized by Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD), nitrogen sorption isotherms, mercury porosimetry measurements, and UV-Vis Diffuse Reflectance Spectrum (DRS). The ...
متن کاملOrganic Thin Film Transistors with Polyvinylpyrrolidone / Nickel Oxide Sol-Gel Derived Nanocomposite Insulator
Polyvinylpyrrolidone / Nickel oxide (PVP/NiO) dielectrics were fabricated with sol-gel method using 0.2 g of PVP at different working temperatures of 80, 150 and 200 ºC. Structural properties and surface morphology of the hybrid films were investigated by X- Ray diffraction (XRD) and Scanning Electron Microscope (SEM) respectively. Energy dispersive X-ray spec...
متن کاملPreparation of Cr-doped TiO2 thin film by sonochemical/CVD method and its visible light photocatalytic activity for degradation of paraoxon
In this work, nanostructured TiO2 and Cr-doped TiO2 thin films were deposited on glass substrate through sonochemical-chemical vapor deposition (CVD) method. The resulting thin films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-visible absorption spectroscopy, and photoluminescence spectroscopy techniques. The TiO2 thin film has nanocubic morphology and ...
متن کاملInvestigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application
CdTe thin films with 2.8 µm thickness were deposited by electron beam evaporation method. X-ray diffraction, scanning electron microscopy, UV-Vis-NIR spectroscopy and atomic force microscopy (AFM) were used to characterize the films. The results of AFM analysis revealed that the CdTe films have uniform surface. CdTe thin films were heat-treated by SnCl2 solution. Structural analysis using XRD s...
متن کاملThe use of high-energy synchrotron diffraction for residual stress analyses
Residual stresses are formed due to inhomogeneous deformation gradients or temperature ®elds during the manufacturing and processing of components. In superposition with load stresses, they severely in ̄uence the strength and failure of components. For the non-destructive evaluation of the residual stresses in crystalline materials, well-developed angle dispersive methods for X-ray residual stre...
متن کامل