Measurement of dynamic capillary pressure and viscosity via themulti-sample micro-slit rheometer

نویسندگان

  • Doyoung Moon
  • Kalman B. Migler
چکیده

Article history: Received 14 October 2008 Received in revised form 30 January 2009 Accepted 18 February 2009

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Rheological characteristics of intermediate moisture blends of pregelatinized and raw wheat starch.

Rheological properties of intermediate moisture (35-45% wet basis) doughs from pregelatinized and raw wheat starch blends of various ratios were characterized using off-line capillary rheometry and online slit-die extrusion. In the case of capillary rheometer, viscosity of blends decreased by up to 50% as pregel starch concentration increased from 5 to 45%, whereas tests could not be conducted ...

متن کامل

Capillary rheometry of polymer melts – Simulation and experiment

This paper discusses shear viscosity measurements of polymer melts by the capillary rheometer. Particular emphasis is placed on investigating the effects of viscous heating and pressure dependence of viscosity in capillary flows. The capillary flow problem is addressed by means of numerical simulation using the finite element method to solve the equations of continuity, momentum and energy alon...

متن کامل

Measurement of the Rheology of Crude Oil in Equilibrium with CO2 at Reservoir Conditions

A rheometer system to measure the rheology of crude oil in equilibrium with carbon dioxide (CO2) at high temperatures and pressures is described. The system comprises a high-pressure rheometer which is connected to a circulation loop. The rheometer has a rotational flow-through measurement cell with two alternative geometries: coaxial cylinder and double gap. The circulation loop contains a mix...

متن کامل

Constitutive characterization of extruded rubber blends by means of an extrusion rheometer

In this contribution the influence of an extrusion process on the viscosity function of rubber blends is identified. This knowledge is required for performance of realistic numerical simulations of injection heads and extrusion tools for rubber profile production. The experimental basis of this investigation are tests with both, capillary and extrusion rheometer. The latter is a combination of ...

متن کامل

A high-shear, low Reynolds number microfluidic rheometer

We present a microfluidic rheometer that uses in situ pressure sensors to measure the viscosity of liquids at low Reynolds number. Viscosity is measured in a long, straight channel using a PDMS-based microfluidic device that consists of a channel layer and a sensing membrane integrated with an array of piezoresistive pressure sensors via plasma surface treatment. The micro-pressure sensor is fa...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009