Effects of Large Organic Material on Channel Form and Fluvial Processes

نویسنده

  • EDWARD A. KELLER
چکیده

Stream channel development in forested areas is profoundly influenced by large organic debris (logs , limbs and rootwads greater than 10 cm in diameter) in the channels. In low gradient meandering streams large organic debris enters the channel through bank erosion , mass wasting, blowdown, and collapse of trees due to ice loading. In small streams large organic debris may locally influence channel morphology and sediment transport processes because the stream may not have the competency to redistribute the debris. In larger streams flowing water may move large organic debris, concentrating it into distinct accumulations . (debris jams). Organic debris may greatly affect channel form and process by: increasing or decreasing stabilty of stream banks; influencing development of midchannel bars and short braided reaches; and faciltating, with other favourable circumstances, development of meander cutoffs. In steep gradient mountain streams organic debris may enter the channel by all the processes mentioned for low gradient streams. In addition , considerable debris may also enter the channel by way of debris avalanches or debris torrents. In small to intermediate size mountain streams with steep valley walls and little or no floodplain or flat valley floor, the effects of large organic debris on the fluvial processes and channel form may be very significant. Debris jams may locally accelerate or retard channel bed and bank erosion and/or deposition; create sites for significant sediment storage; and produce a stepped channel profile, herein referred to as 'organic stepping , which provides for variable channel morphology and flow conditions. The effed of live or dead trees anchored by rootwads into the stream bank may not only greatly retard bank erosion but also influence channel width and the development of small scour holes along the channel beneath tree roots. Once trees fall into the stream , their influence on the channel form and process may be quite different than when they were defending the banks, and, depending on thesize of the debris, size of the stream , and many other factors, their effects range from insignificant to very important.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Investigating the interaction between rivers and sand dunes in arid and semi-arid regions of Iran

Extended abstract 1- Introduction Fluvial and aeolian processes are important factors in changing the surface of morphology in the Earth. When rivers and sand dunes meet, the transportation of sediment  between them can lead to one of the systems or both  of them change. With their connection between river sediment and wind systems there would be lots of reactions, but very little has been st...

متن کامل

Contemporary changes in dissolved organic carbon (DOC) in humandominated rivers: is there a role for DOC management?

1. Dissolved organic carbon (DOC) plays a central role in the dynamics of stream and river ecosystems, affecting processes such as metabolism, the balance between autotrophy and heterotrophy, acidity, nutrient uptake and bioavailability of toxic compounds. However, despite its importance to stream processes, restoration and management activities rarely incorporate DOC as a major management crit...

متن کامل

The Response of Fluvial Systems to Large Flood Events

In the summer of 2001, an intense thunderstorm in southeastern Caspian Sea triggered a catastrophic flood in the Madarsoo basin . Use of methods including high-resolution aerial photographs and satellite images interpretation, multi-date mapping, hydraulic calculations and field observations made possible the documentation of the geomorphic impacts on the Madarsoo River and its tributaries. Geo...

متن کامل

The Effect of Annealing Heat Treatment on the Bond of Explosivewelded Copper/Steel after the ECAR Process

Equal channel angular rolling (ECAR) process is one of the severe plastic deformation (SPD) methods that have been used to make ultra-fine grain (UFG) materials with improving the mechanical properties of samples. After performing the process at several paths, a large strain is applied to the material that can cause decreasing the grain size and improving the mechanical and physical properties ...

متن کامل

The Effect of Annealing Heat Treatment on the Bond of Explosivewelded Copper/Steel after the ECAR Process

Equal channel angular rolling (ECAR) process is one of the severe plastic deformation (SPD) methods that have been used to make ultra-fine grain (UFG) materials with improving the mechanical properties of samples. After performing the process at several paths, a large strain is applied to the material that can cause decreasing the grain size and improving the mechanical and physical properties ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2005