The Tuning of the Cavity Options for Diamond
نویسنده
چکیده
The RF group is considering both normally conducting [1] and super-conducting [2] cavity systems for DIAMOND. This paper will discuss using temperature and longitudinal deformation as methods of tuning for a normally conducting cavity. The longitudinal deformation of a super-conducting cavity is also discussed with its added technical difficulties of nanometer resolution and its cryogenic environment. Finite Element Analysis and URMEL-T [3] software has been used extensively to predict cavity geometry changes and the associated frequency shift.
منابع مشابه
Tuning extension of a Difference-Frequency generation up to 100 nm using V-shaped external-cavity for the pump laser
In this research, tunability of a commercial diode laser has extended to about more than ± 11 nm using a V-shaped external-cavity fabricated around the laser. Although under normal condition it can be tuned up to about ± 4 nm just by changing its temperature and injection current. Such modified diode laser has then used in a difference-frequency generation (DFG) experimental setup as pump sourc...
متن کاملساخت و اندازه‌گیری مشخصات یک تیوب شتاب دهنده خطی باند X
Considering the challenges in fabrication and electromagnetic characterization of linear accelerator tube, first four major effective parameters in cavity fabrication, including cavity material, dimension agreement, surface roughness and concentricity of cavities have been studied. Then, considering appropriate electromagnetic properties, fabrication results of cavities, techniques for their re...
متن کاملThe effect of mechanical surface conditioning methods on the shear bond strength of repaired composites
The effect of mechanical surface conditioning methods on the shear bond strength of repaired composites Dr. P. Alizadeh Oskuee* - Dr. N. Mohammadi* - Dr. S. Savadi Oskuee* - Dr. A. Hoseini** *- Assistant Professor of Operative Dentistry Dept. - Faculty of Dentistry – Tabriz University of Medical Sciences. **- Dentist. Background and Aim: Considering the cost and quantity of tooth loss in the pr...
متن کاملInvestigation of Thermal Operational Regimes for Diamond Bit Drilling Operations (TECHNICAL NOTE)
This paper reviews existing studies and investigates thermal operational regimes of diamond bit during drilling operations. The operating temperature of the diamond core drill is studied under bench condition and an optimal thermal range are presented. Based on this study, it was noted that glazing of diamond tools is observed at temperatures less than 327°C, and normal wear of diamond tools is...
متن کاملCombining fuzzy RES with GA for predicting wear performance of circular diamond saw in hard rock cutting process
Predicting the wear performance of circular diamond saw in the process of sawing hard dimensional stone is an important step in reducing production costs in the stone sawing industry. In the present research work, the effective parameters on circular diamond saw wear are defined, and then the weight of each parameter is determined through adopting a fuzzy rock engineering system (Fuzzy RES) bas...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1998