Features of the stress field at the surface of a flush shrink - fit shaft
نویسنده
چکیده
The state of stress induced by a shrink-fitted circular shaft in an elastically similar half-space, positioned so that the end of the shaft is flush with the remainder of the free surface, is studied. At deep interior points the classical plane strain (Lamé) solution obtains, and the transition to the free surface state is found. It is found that a residual interfacial axial shear develops and the coefficient of friction needed to ensure adhesion along the interface is found. The effect of slip when a lower coefficient of friction is present is also found as a solution to an integral equation.
منابع مشابه
Optimization of rotor shaft shrink fit method for motor using “Robust design”
This research is collaborative investigation with the general-purpose motor manufacturer. To review construction method in production process, we applied the parameter design method of quality engineering and tried to approach the optimization of construction method. Conventionally, press-fitting method has been adopted in process of fitting rotor core and shaft which is main component of motor...
متن کاملReverse Engineering for Designing the Coupling of a 32 MW Rotor-generator by Shrink Fitting Method (TECHNICAL NOTE)
This study presents a designing process for refurbishing of a 32 MW rotor-generator damaged coupling. The reason of rotor damage was being hit by the quivers of an explosion. The original coupling was union with the rotor formed after a machining process on a mono block forged rotor. In some areas imposed damages caused the breaking off and detachment of some parts in the coupling flange. Becau...
متن کاملElastic analysis of Shrink-fitted Thick FGM Cylinders Based on Linear Plane Elasticity Theory
Nowadays, functionally graded materials (FGM) are widely used in many industrial, aerospace and military fields. On the other hand, the interest in the use of shrink-fitted assemblies is increasing for designing composite tubes, high-pressure vessels, rectors and tanks. Although extensive researches exist on thick-walled cylindrical shells, not many researches have been done on shrink-fitted th...
متن کاملTorsion of Poroelastic Shaft with Hollow Elliptical Section
In this paper torsion of hollow Poroelastic shaft with Elliptical section is developed. Using the boundary equation scheme. It looks for a stress function where satisfied Poisson equation and vanishes on boundary. It also analyzed stress function and warping displacement for the hollow elliptical section in Poroelastic shaft. At the end, the result of elastic and poroelastic shaft in warping di...
متن کاملFailure analysis of an intake valve in a gasoline engine
This paper presents a failure analysis on a failed intake valve in a gasoline engine. During an endurance test, an intake valve was broken and caused some damages on the piston. Material examinations (by a light microscope and also a scanning electron microscope) were conducted on the fracture surface of the intake valve shaft. Results showed that no pores or defects could be observed and the m...
متن کامل