Young’s modulus evolution and texture-based elastic–inelastic strain partitioning during large uniaxial deformations of monoclinic nickel–titanium
نویسنده
چکیده
The authors draw upon recent first-principles calculations of monoclinic NiTi elastic constants to develop a combined numerical– empirical, texture-based approach for calculating the Young’s modulus of polycrystalline, monoclinic nickel–titanium specimens. These calculations are carried out for load direction inverse pole figures measured in situ via neutron diffraction during tension–compression deformations to 18% true strain, as well as unloading events. As demonstrated by application to this empirical data set, the texturebased approach results in the ability to quantify the evolution of Young’s modulus and to micromechanically partition elastic and inelastic macroscopic strains for the entirety of non-linear and asymmetric uniaxial deformations, a result that had not been achieved previously for a monoclinic material. 2012 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
منابع مشابه
Micromechanical quantification of elastic, twinning, and slip strain partitioning exhibited by polycrystalline, monoclinic nickel–titanium during large uniaxial deformations measured via in-situ neutron diffraction
We draw upon existing knowledge of twinning and slip mechanics to develop a diffraction analysis model that allows for empirical quantification of individual deformation mechanisms to the macroscopic behaviors of low symmetry and phase transforming crystalline solids. These methods are applied in studying elasticity, accommodation twinning, deformation twinning, and slip through neutron diffrac...
متن کاملMartensite modulus dilemma in monoclinic NiTi-theory and experiments
Article history: Received 26 February 2014 Received in final revised form 30 April 2014 Available online 4 June 2014
متن کاملPii: S1359-6454(99)00214-1
ÐSamples of superelastic NiTi and superelastic NiTi reinforced with 10 vol.% TiC particles were deformed under uniaxial compression to 975 MPa while neutron diraction spectra were simultaneously collected. Despite the presence of sti TiC particles, a macroscopic strain of 3% was obtained in the composite on loading and was fully recovered on unloading. The diraction spectra were analyzed by ...
متن کاملNon-entropic theory of rubber elasticity: flexible chains with weak excluded-volume interactions
Strain energy density is calculated for a network of flexible chains with weak excluded-volume interactions (whose energy is small compared with thermal energy). Constitutive equations are developed for an incompressible network of chains with segment interactions at finite deformations. These relations are applied to the study of uniaxial and equi-biaxial tension (compression), where the stres...
متن کاملرفتار مکانیکی آلیاژ نیکل - تیتانیم متخلخل ساخته شده به روش سنتز احتراقی حجمی برای استفاده در جراحی استخوان
Mechanical property of porous nickel-titanium alloy produced by volumetric combustion synthesis (VCS) for bone surgery applications is reported in this paper. Stress-strain behavior of the alloy is determined by uniaxial tension test. Superelastic diagram of the porous alloy is compared with that of the solid material cooled from austenite stability temperature. Due to movements of the dislocat...
متن کامل