Investigation of the Fault Tolerance of the PIM-SM IP Multicast Routing Protocol for IPTV Purposes
نویسندگان
چکیده
IPTV services should use an IP multicast solution for a network bandwidth efficient delivery of the media contents. PIM-SM is the most commonly used IP multicast routing protocol in IPTV systems. A short introduction to the operation of PIM-SM is given. Its fault tolerance is examined by experimenting on a mesh topology multicast test network built up by XORP routers in a virtualized environment. Different fault scenarios are played and different parameters of PIM-SM and OSPF are examined if they influence and how they influence the outage time of an IPTV service. A formal model is given for the service outage time of the IPTV service on the basis of the results of the experiments.
منابع مشابه
Towards the Modelling of the Fault Tolerance Mechanism of the Pim-sm Multicast Routing Protocol in an Iptv Environment
The fault tolerance mechanism of the PIM-SM IP multicast routing protocol is investigated in order to be able to model it. The analysis is done by playing different fault scenarios on a mesh topology multicast test network built up by XORP routers in a virtualized environment. Different parameters of the PIM-SM and the OSPF protocols are examined if they influence and how they influence the out...
متن کاملExtension of RP relocation to PIM-SM multicast routing
| The Protocol Independent Multicast-Sparse Mode (PIM-SM) protocol establishes core-base tree to forward multicast datagrams in a network. In PIM-SM, the core or Rendezvous Point (RP) of a group is determined at each multicast router by hashing a group address, i.e., a class-D IP address, to one of the candidate RPs. The hash function is characterized by its ability to evenly and uniquely choos...
متن کاملAnalysis of Internet Multicast Traffic Performance Considering Multicast Routing Protocol
Recently, audio and video delivery services are widely spread in the Internet. In order to deliver these data to multiple receivers at the same time, the multicast technologies are indispensable. In such a situation, the performance analysis of multicast traffic will be important in order to design and operate the Internet. Multicast traffic is controlled by its own routing protocol and the mul...
متن کاملBandwidth Constrained IP Multicast Traffic Engineering Without MPLS Overlay
Existing multicast traffic engineering (TE) solutions tend to use explicit routing through MPLS tunnels. In this paper we shift away from this overlay approach and address the bandwidth constrained IP multicast TE directly based on link state IGP routing protocols. The objective is that, through plain PIM-SM shortest path routing with optimized Multi-topology IS-IS (MISIS) link weights, the res...
متن کاملProtocol Independent Multicast - Sparse Mode (PIM-SM): Protocol Specification (Revised)
Status of This Memo This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited. Abstract This document specifies Protocol...
متن کامل