Mechanochemical Processing of Blast Furnace Slag for its Reuse as Adsorbent
نویسندگان
چکیده
Mechanochemical Processing of Blast Furnace Slag for its Reuse as Adsorbent Salvatore Andini, Fabio Montagnaro*, Luciano Santoro, Grazia Accardo, Raffaele Cioffi, Francesco Colangelo Dipartimento di Scienze Chimiche, Università degli Studi di Napoli Federico II, Monte Sant’Angelo, 80126 Napoli (I) Dipartimento per le Tecnologie, Università degli Studi di Napoli Parthenope, Centro Direzionale Is. C4, 80143 Napoli (I) [email protected]
منابع مشابه
Reclaiming Polluted Marine Sediments. A Case History
The Development Plan of Taranto port (S. Italy) predicts the dredging of approx.20 Mt sediments, ≥10% of which are polluted. By appointment of Italian Environment Ministry, a detailed experimental investigation was carried out at laboratory and pilot-scale levels on the best available techniques to reclaim the polluted sediment so to reuse it in a technic and cost effective manner. A short pre-...
متن کاملTechnical Effects of Air Cooled Blast Furnace Slag on Asphalt Mixtures
Air cooled blast furnace slag is a by product made of gradually air cooled molten blast furnace slag and is often stored in stockpiles near the iron mills and usually occupy a wide area around the iron mills. From this perspective the further use of these materials can have its own merits. Air cooled blast furnace slag can be used in asphalt mixtures because of their proper frictional propertie...
متن کاملThe Study of Ion Adsorption by Amorphous Blast Furnace Slag
In this study, the blast furnace slag was used as absorbing bed and then, its ionic adsorption was studied. For this reason, various experimental parameters such as pH, contact time and the primary ion concentration were investigated. The remaining concentrations of ions such as; Mn2+ and Fe2+ in water were measured by atomic adsorption spectroscopy. The chemical and p...
متن کاملElectric Arc Furnace Slag and Blast Furnace Dust, Use for the Manufacture of Asphalt Concrete for Roads
This paper analyzes how feasible it is to use electric arc furnace slag as coarse aggregate, and blast furnace dust as fine aggregate in the manufacture of hot asphalt concrete for roads. Three mixtures were designed using the Ramcodes methodology, the M1 mixture of control with conventional materials, the M2 mixture replacing 50% and the M3 mixture replacing 100% of the conventional aggregates...
متن کاملAbsorption of Lead Ions by Various Types of Steel Slag
Steel slags are the by products of steel industries, which forms during reduction process of iron melting. The chemical composition of it changes depending to the melting procedure. Its mineralogical composition also varies based on the cooling procedure. Two different types of steel slag were used as absorbing bed for various concentrations of Pb2+ ions in the form of lead chlor...
متن کامل