Sintering behaviour of composite materials borosilicate glass-ZrO2 fibre composite materials
نویسندگان
چکیده
The characteristics and properties of mixtures of a borosilicate glass and ZrO2 fibres obtained from compacts isothermally sintered are presented. Three different particle sizes of glass powder and different sintering temperatures and times have been used to reveal the influence of the specific surface area and the glass matrix viscosity on sintering. The fundamental developed aspects are the sintering kinetics, the dense material characterisation and the study of the sintering mechanisms. The composite materials are suitable for sealing molten carbonate fuel cells (MCFC). # 2002 Elsevier Science Ltd. All rights reserved.
منابع مشابه
Flexural and Impact Properties of Stainless Steel based Glass Fibre Reinforced Fibre Metal Laminate under Hygrothermal Conditioning
Fibre metal laminates (FMLs) have appeared as the most suitable materials for shipbuilding, aeronautical and aerospace applications due to their superior mechanical properties over traditional materials. In this paper, degradation in flexural and impact properties of glass fibre/epoxy composite (GF/E composite) and stainless steel glass fibre/epoxy fibre metal laminate (SS FML) due to hygrother...
متن کاملInvestigation of Glass- Steel Slag Foam Composite Sintering in Presence of SiC
Amorphous steel slag was blended with different concentrations of waste glass (20, 40, 50, 60, 70 wt.%) and SiC to obtain a composite. According to Hot Stage Microscopy images, slag-glass composite contractions started at 1050 ºC. scanning electron microscope micrographs of slag-SiC (foaming agent) composite revealed tunnel-like porosities of 500 to 1000 microns. Gaseous products of carbide dec...
متن کاملDoctor blade sol-gel deposition of a nano-composite copper-zinc oxide on borosilicate glass for advanced oxidative degradation of textille dye in water environment
Nano-composite copper-zinc oxide (NCCZO) was deposited on borosilicate glass using a novel sol-gel/doctor-blade technique. The photocatalyst was prepared from copper acetylacetonate, zinc acetylacetonate, monoethanolamine (MEA) and citric acid monohydrate at 75 oC, aged for 1 d and annealed at 650 oC. The properties of the NCCZO nano-composite were investigated by X-ray diffraction (XRD) and fi...
متن کاملCharacterization of Glass Fibre – Coconut Coir– Human Hair Hybrid Composites
A composite material is a combination of two or more materials arranged in the form of layer one on the other layer using binding material through some prescribed methods. In the Glass fibre coconut fibre human hair hybrid composite method, the epoxy resin is used as binding material, in which one layer is formed of glass fibre, followed by coconut fibre and then by human hair. By using hand la...
متن کاملStructure evolution and properties of biogenic hydroxyapatite-based biocomposite
Two-step sintering has been used to investigate the structure evolution and properties of the biogenic HA/glass composite containing 50 wt.% Na2O-B2O3-SiO2-based glass. The borosilicate glass facilitated the sintering process due to the viscous glass flow and stabilized the HA phase against thermal decomposition. It has been established that the structure significantly changes, becoming more ho...
متن کامل