Particle distribution and orientation in Al-Al3Zr and Al-Al3Ti FGMs produced by the centrifugal method
نویسندگان
چکیده
P.D. Sequeira 1, 2, , Yoshimi Watanabe 1, b and L.A. Rocha 2, 3, c Department of Functional Machinery and Mechanics, Shinshu University, 3-15-1, Tokida, Ueda 386-8567, Japan CIICS Centro de Investigacao em Comportamento de Superficies, Universidade do Minho, Campus de Gualtar, 4800-058 Guimaraes, Portugal DEM – Departamento de Engenharia Mecanica, Universidade do Minho, Campus de Gualtar, 4800-058 Guimaraes, Portugal a [email protected], b [email protected], c [email protected]
منابع مشابه
Fabrication of Al-Al3Ti/Ti3Al Functionally Graded Materials under a Centrifugal Force
Fabrication of Al-Al₃Ti functionally graded materials (FGMs) under the centrifugal force has recently attracted some attention. The controlled compositional gradient of the fabricated FGMs, the low cost of the process, and the good mold filling, are the main advantages of the centrifugal method (CM). Using the conventional CM techniques such as the centrifugal solid-particle method and centrifu...
متن کاملA Novel Fabrication Method for Functionally Graded Materials under Centrifugal Force: The Centrifugal Mixed-Powder Method
One of the fabrication methods for functionally graded materials (FGMs) is a centrifugal solid-particle method, which is an application of the centrifugal casting technique. However, it is the difficult to fabricate FGMs containing nano-particles by the centrifugal solid-particle method. Recently, we proposed a novel fabrication method, which we have named the centrifugal mixed-powder method, b...
متن کاملThe Effect of Heat Treatment on the Microstructure and Mechanical Properties of Al/Al3Zr + Al3Ti In-situ Hybrid Composite Fabricated by Friction Stir Processing
In this research, an in-situ hybrid composite reinforced by Al3Zr and Al3Ti aluminide particles was fabricated by friction stir processing (FSP). The base metal was in the form of a rolled Al 3003-H14 alloy sheet, and zirconium and titanium metal powders were used as the reinforcements. Six passes of FSP were applied. Tensile strength and hardness of the base metal, as well as FSPed samples bef...
متن کاملNucleation and Precipitation Strengthening in Dilute Al-Ti and Al-Zr Alloys
Two conventionally solidified Al-0.2Ti alloys (with 0.18 and 0.22 at. pct Ti) exhibit no hardening after aging up to 3200 hours at 375 C or 425 C. This is due to the absence of Al3Ti precipitation, as confirmed by electron microscopy and electrical conductivity measurements. By contrast, an Al-0.2Zr alloy (with 0.19 at. pct Zr) displays strong age hardening at both temperatures due to precipita...
متن کاملتاثیر عملیات حرارتی بر ریزساختار و رفتار سایشی کامپوزیت درجای Al 3003/Al3Zr+ Al3Ti تولید شده توسط فرآیند اصطکاکی اغتشاشی
در این مقاله، کامپوزیت هیبریدی سطحی Al 3003/Al3Zr + Al3Ti توسط فرآیند اصطکاکی اغتشاشی (FSP) به‌صورت درجای تولید شد. از ورق کارشده‌ی آلیاژ آلومینیم Al 3003-H14 به‌عنوان زیرلایه و از ذرات فلزی زیرکنیم و تیتانیم به‌عنوان تقویت‌کننده استفاده شد و تعداد شش پاس FSP اعمال گردید. سپس، بر روی نمونه‌‌های FSP شده یک مرحله عملیات حرارتی آنیل در دمای ℃ 500 و به‌مدت زمان 4 ساعت انجام شد. سختی و رفتار سایشی ف...
متن کامل