Custom design of CMOS
نویسندگان
چکیده
The design challenges and custom design techniques associated with low-power, smallarea, high-performance CMOS digital signalprocessing circuits for hard-disk-drive applications are presented. The advantages of custom design are demonstrated by an example custom digital FIR filter macro that provides substantial improvement in performance, area, and power dissipation over standard-cell implementations.
منابع مشابه
Design of CMOS Full Adder Application Specific Integrated Circuit
Application specific full custom design integrated circuit is a methodology for making a logic cell, circuit or layout specification. Full custom design circuit is the part of Application specific integrated circuit. A gate array or uncommitted logic array as an approach to the design and manufacture of application specific integrated circuit. It requires custom chip fabrication using a complet...
متن کاملDesign-Kit Development Based upon ISiT’s CMOS 1μm Process Technology
This paper summarizes the necessary steps we went through to develop a design-kit for full-custom design based upon ISiT’s CMOS 1μm technology process. All basic information dealing with technology setup, rule decks and analog simulation environment is provided and commented. The design-kit is fully compliant with Cadence Generic Process Design-Kit (GPDK) methodology guide, revision 1.8, Septem...
متن کاملLow Power Layout Design of Priority Encoder Using 65nm Technology
this paper provides comparative performance analysis of power and area of 4 bit priority encoder using 65nm technology. Two priority encoder approaches are presented, one with semi custom and the other with full custom. The main objective is to compare semi custom and full custom designed layout on the basis of two parameters which is power and area. Both the semi custom circuit simulation and ...
متن کاملLow Power, CMOS Digital Autocorrelator Spectrometer for Spaceborne Applications
A 128-channel digital autocorrelator spectrometer using four 32 channel low power CMOS correlator chips has been built and tested. The CMOS correlator chip uses a 2-bit multiplication algorithm and a full-custom CMOS VLSI design to achieve low DC power consumption. The digital autocorrelator spectrometer has a 20 MHz band width, and the total DC power requirement is 6 Watts.
متن کاملSemi-Custom High-Speed Datapath Design Using Commericial ASIC Design Tools
A semi-custom high-speed datapath design flow is described using commercial ASIC design CAD tools interacting with a simple hierarchical placement Matlab code. The flow leverages the vast automation and verification capabilities of ASIC design CAD tools, while providing a precision close to a fully custom-designed circuit. The methodology is applied to the design of a 4channel, 3-GHz per-channe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2002