Minimization of Burr Height and Tool Wear in Drilling of Aluminium Metal Matrix Composites Using Desirable-Fuzzy Approach
نویسنده
چکیده
This paper is focused on minimization of the burr height and Tool wear in drilling of Aluminium Metal Matrix Composites(AMMC) using “Desirable-Fuzzy” approach, which is developed by combining the Desirability Function Analysis and Fuzzy Logic. AMMC samples are prepared based on selected material parameters and drilling experiments are conducted on these samples as per Taguchi OA L27 which is designed based on material and drilling parameters. The experimental results: Tool wear and Burr height are measured for each experimental run. These results are analyzed using Desirable-Fuzzy approach and optimum influential factors combination is identified. The identified combination of influential factors is tested through confirmation experiment and is satisfactory.
منابع مشابه
Study on tool wear and surface roughness in end milling of particulate aluminum metal matrix composite: Application of response surface methodology
Metal matrix composites have been widely used in industries, especially aerospace industries, due to their excellent engineering properties. However, it is difficult to machine them because of the hardness and abrasive nature of reinforcement elements like silicon carbide particles (SiCp).In the present study, an attempt has been made to investigate the influence of spindle speed (N), feed rate...
متن کاملProcessing and Characterization of AA2024/Al2O3/SiC Reinforces Hybrid Composites Using Squeeze Casting Technique
The present requirement of automobile industry is seeking lightweight material that satisfices the technical and technological requirements with better mechanical and tribological characteristics. Aluminium matrix composite ( AMC ) materials meet the requirements of the modern demands. AMCs are used in automotive applications as engine cylinders, pistons, disc and drum brakes. This paper inves...
متن کاملInvestigation on the Effect of Drill Geometry and Pilot Holes on Thrust Force and Burr Height When Drilling an Aluminium/PE Sandwich Material
Composite materials are widely employed in the naval, aerospace and transportation industries owing to the combination of being lightweight and having a high modulus of elasticity, strength and stiffness. Drilling is an operation generally used in composite materials to assemble the final product. Damages such as the burr at the drill entrance and exit, geometric deviations and delamination are...
متن کاملMechanical and Tribological Behavior of Aluminum Alloy LM13 Reinforced with Titanium Dioxide Metal Matrix Composites
In the present research work physical, mechanical and tribological behavior of Aluminum (Al) alloy LM13 reinforced with Nano-sized Titanium Dioxide (TiO2) particulates were fabricated, mechanical and tribological properties were investigated. The amount of nano TiO2 particulates in the composite was added from 0.5% to 2% in 0.5 weight percent (wt %) increments. The Al-LM13-TiO2 Metal Matrix Com...
متن کاملMechanical and Tribological Behaviour of Aluminium Metal Matrix Composites Using Powder Metallurgy Technique— a Review
Aluminium metal matrix composites are widely used in engineering applications, specially automobile, aerospace, marine and mineral processing industries owing to their improved wear properties compared to conventional monolithic aluminium alloys. Presently hybrid composites plays vital role in engineering application. The researchers who developed composites, were subjected to many characterisa...
متن کامل