Fibre to the Home/Fibre to the Premises: what, where, and when?
نویسنده
چکیده
After conquering the core and metropolitan networks, fibre is now penetrating into the access domain. Its low loss and huge bandwidth enable the delivery of any present and foreseeable set of broadband services, and also make it a nice match to the wireless link to the end user. Cost effectiveness is a key issue, and will be decisive for the network topology choices. Point-to-point may be the most cost-effective for short-reach access, whereas point-to-multipoint may be the most interesting at mediumto long-reach access, or when line terminations in the local exchange become a key issue. A number of optical techniques being deployed for shared-fibre multiple access are discussed, based on time slot multiplexing, frequency slot multiplexing, code division multiplexing, and wavelength multiplexing, including their application in FTTH/FTTP networks for fast data transfer (ATMor Ethernet-based) and for broadband service distribution (such as CATV). In the research laboratories, techniques aiming at next-generation optical access are being studied, such as wavelength routing for flexible capacity allocation and easily adaptable hosting of services and service providers, and radio-over-fibre techniques creating a powerful symbiosis of the fibre world and the wireless world by enabling centralized radio signal processing.
منابع مشابه
Flexural and Impact Properties of Stainless Steel based Glass Fibre Reinforced Fibre Metal Laminate under Hygrothermal Conditioning
Fibre metal laminates (FMLs) have appeared as the most suitable materials for shipbuilding, aeronautical and aerospace applications due to their superior mechanical properties over traditional materials. In this paper, degradation in flexural and impact properties of glass fibre/epoxy composite (GF/E composite) and stainless steel glass fibre/epoxy fibre metal laminate (SS FML) due to hygrother...
متن کاملApplication of Polypyrrole Coated Stainless-Steel Wire to the Headspace Solid-Phase Microextraction of Aliphatic Amines
The electrochemical coating technique was used for the preparation of a polypyrrole coating on a stainless-steel wire, and applied as a fibre for solid phase microextraction (SPME). The polypyrrole fibre was employed for analyzing four volatile aliphatic amines (ethylamine, propylamine, butylamine and pentylamine) in water by headspace SPME using gas chromatography-flame ionization detection (G...
متن کاملEffect of Nonlinear Phase Variation in Optical Millimetre Wave Radio over Fibre Systems
In this paper, we propose an optical millimetre wave radio-over-fibre (mm-wave RoF) system that uses a dual drive Mach Zehnder modulator (DD-MZM), which is biased at the maximum transmission biasing point, to generate an optical double sideband-suppressed carrier. The input to the DD-MZM are binary phase shift keying (BPSK), quadrature phase shift keying (QPSK), 8-phase shift keying (8-PSK) and...
متن کاملFractional Thermoelasticity Model of a 2D Problem of Mode-I Crack in a Fibre-Reinforced Thermal Environment
A model of fractional-order of thermoelasticity is applied to study a 2D problem of mode-I crack in a fibre-reinforced thermal environment. The crack is under prescribed distributions of heat and pressure. The normal mode analysis is applied to deduce exact formulae for displacements, stresses, and temperature. Variations of field quantities with the axial direction are illustrated graphically....
متن کاملEvaluating the Sintering Temperature Control Towards the Adsorptivity of Ammonia onto the Natural Zeolite Based Hollow Fibre Ceramic Membrane
The disproportionate quantity of ammonia presence in water has led to serious drinkable water scarcity worldwide. The abundant source of mineral and superior cations selectivity has made natural zeolite as a good adsorbent for the ammonia removal. This work aims to fabricate natural zeolite based hollow fibre ceramic membrane (HFCM) via extrusion based phase inversion and sintering techniques f...
متن کامل