A Novel 6 dof Parallel Robot With Decoupled Translation and Rotation
نویسندگان
چکیده
This paper describes a new parallel robot with 6 degree of freedom (dof) and decoupled kinematics. The robot is composed of six legs with actuated prismatic joints; three legs control the spatial position of the center of the mobile platform, while the remaining legs are used to define the end effector orientation. The decouple kinematics is obtained by using a new approach for a triple spherical joint in conjunction with a 3-UPS parallel robot. In this work, the forward and inverse kinematic analysis of the mechanism is the first question answered, then, the velocity analysis is performed via screw theory, and, finally, a singularity and workspace analysis is performed using the previously obtained screw-based Jacobian.
منابع مشابه
Structure Synthesis of 6-DOF 3-3 Decoupled Parallel Manipulators
In parallel manipulator design, usual 6-DOF PMs, like the Stewart platform, suffer from the disadvantages of difficult forward kinematics, coupled motion, and small workspace, so that the motion planing and control become very complicated and difficult to be implemented in real application. Most of the PMs with lower mobility are over-constrained when assembly errors are considered [1]. Therefo...
متن کاملKinematic Mapping and Forward Kinematic Problem of a 5-DOF (3T2R) Parallel Mechanism with Identical Limb Structures
The main objective of this paper is to study the Euclidean displacement of a 5-DOF parallel mechanism performing three translation and two independent rotations with identical limb structures-recently revealed by performing the type synthesis-in a higher dimensional projective space, rather than relying on classical recipes, such as Cartesian coordinates and Euler angles. In this paper, Study's...
متن کاملKinematic and Dynamic Analysis of Tripteron, an Over-constrained 3-DOF Translational Parallel Manipulator, Through Newton-Euler Approach
In this research, as the main contribution, a comprehensive study is carried out on the mathematical modeling and analysis of the inverse kinematics and dynamics of an over-constraint three translational degree-of-freedom parallel manipulator. Due to the inconsistency between the number of equations and unknowns, the problem of obtaining the constraint forces and torques of an over-constraint m...
متن کاملFlexible Foot/Ankle Based on PKM with Force/Torque Sensor for Humanoid Robot
This paper describes the development of a novel humanoid robot foot/ankle based on an orientation Parallel Kinematic Mechanism for intelligent and flexible control. With three identical Universal-Prismatic-Spherical prismatic-actuated limbs and a central Universal-Revolute passive limb, the PKM can perform three degrees of freedom rotation motions. In order to enable the humanoid robot safely t...
متن کاملANFIS+PID Hybrid Controller Design for Controlling of a 6-DOF Robot Manipulator and its Error Convergence Analysis
In this paper, an ANFIS+PID hybrid control policy has been addressed to control a 6-degree-of freedom (6-DOF) robotic manipulator. Then its error convergence has been also evaluated. The ability to formulate and estimate the system uncertainties and disturbances along with system dynamics and rejecting the disturbances effect are some advantages of the proposed method in comparing with the co...
متن کامل