Bidirectional Forwarding Detection (BFD) for IPv4 and IPv6 (Single Hop)

نویسندگان

  • Dave Katz
  • Dave Ward
چکیده

This document is subject to BCP 78 and the IETF Trust’s Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Common Interval Support in Bidirectional Forwarding Detection

Bidirectional Forwarding Detection (BFD) requires that messages be transmitted at regular intervals and provides a way to negotiate the interval used by BFD peers. Some BFD implementations may be restricted to only support several interval values. When such BFD implementations speak to each other, there is a possibility of two sides not being able to find a common value for the interval to run ...

متن کامل

Bidirectional Forwarding Detection (BFD) for MPLS Label Switched Paths (LSPs)

One desirable application of Bidirectional Forwarding Detection (BFD) is to detect a Multiprotocol Label Switching (MPLS) Label Switched Path (LSP) data plane failure. LSP Ping is an existing mechanism for detecting MPLS data plane failures and for verifying the MPLS LSP data plane against the control plane. BFD can be used for the former, but not for the latter. However, the control plane proc...

متن کامل

Management of DiffServ-over-MPLS Transit Networks with BFD/OAM in ForCES Architecture

This paper proposes a management of DiffServ-over-MPLS transit network with BFD(Bidirectional Forwarding Detection)/OAM (operation, administration and maintenance) in ForCES (Forwarding and Control Element Separation) architecture for QoS-guaranteed DiffServ-over-MPLS traffic engineering. The proposed BFD and ForCES functions are implemented on Intel 2400 network processor, where BFD/OAM packet...

متن کامل

Advertising IPv4 Network Layer Reachability Information with an IPv6 Next Hop

Multiprotocol BGP (MP-BGP) specifies that the set of network-layer protocols to which the address carried in the Next Hop field may belong is determined by the Address Family Identifier (AFI) and the Subsequent Address Family Identifier (SAFI). The current AFI/SAFI definitions for the IPv4 address family only have provisions for advertising a Next Hop address that belongs to the IPv4 protocol w...

متن کامل

MT-RPL: a cross-layer approach for mobility support in RPL

Low Power and Lossy Networks (LLNs) are inherently dynamic nodes move or experience link perturbations. Routing packets in LLNs is generally performed by the IETF IPv6 Routing Protocol for Low-Power and Lossy Networks (RPL). To face the dynamics of LLN, RPL is helped by external mechanisms such as Neighbor Unreachability Detection (NUD) or Bidirectional Forwarding Detection (BFD). In this artic...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • RFC

دوره 5881  شماره 

صفحات  -

تاریخ انتشار 2010