Using 2x2 switching modules to build large 2-D MEMS optical switches
نویسندگان
چکیده
MEMS optical switch technology is one of the key technologies in Wavelength Division Multiplexing (WDM) optical networks. Although the 2-D MEMS optical switch technology is mature, the commonly used crossbar architecture is not amenable to building large switches. In this paper, we propose a design of 2 × 2 switching modules, and use it to build large 2-D MEMS optical switches with architectures such as Spanke-Beneš and Beneš networks.
منابع مشابه
Using 2×2 switching modules to build large 2-D MEMS optical switches
MEMS optical switch technology is one of the key technologies in Wavelength Division Multiplexing (WDM) optical networks. Although the 2-D MEMS optical switch technology is mature, the commonly used crossbar architecture is not amenable to building large switches. In this paper, we propose a design of 2 × 2 switching modules, and use it to build large 2-D MEMS optical switches with architecture...
متن کاملAlternative structures for two-dimensional MEMS optical switches [Invited]
Two-dimensional (2-D) microelectromechanical system (MEMS) optical switches have the merits of easy fabrication and high reliability. Since the optical signal loss is mainly proportional to the length of signaling paths in the switches, current 2-D MEMS optical switches that use a crossbar structure have a rather limited number of ports. For larger 2-D MEMS optical switches, we may use nonrecta...
متن کاملArray Interconnection for Rearrangeable 2-D MEMS Optical Switch
Two-dimensional (2-D) microelectromechanical systems (MEMS) optical switches can be constructed by arranging the MEMS-actuated micromirrors as an array. We consider here the switching capability, routing, and optimization of the rectangular array interconnection on which the capability and efficiency of 2-D MEMS switches depend. The switching capability of a rectangular array is proved analytic...
متن کاملDesign and simulation of a RF MEMS shunt capacitive switch with low actuation voltage, low loss and high isolation
According to contact type, RF MEMS switches are generally classified into two categories: Capacitive switches and Metal-to-Metal ones. The capacitive switches are capable to tolerate a higher frequency range and more power than M-to-M switches. This paper presents a cantilever shunt capacitive RF MEMS switch with characteristics such as low trigger voltage, high capacitive ratio, short switchin...
متن کاملRobust Lyapunov-based Control of MEMS Optical Switches
In this paper, a robust PID control scheme is proposed for Micro-Electro-Mechanical-Systems (MEMS) optical switches. The proposed approach is designed in a way which solves two challenging and important problems. The first one is successful reference tracking and the second is mitigating the system nonlinearities. The overall system composed of nonlinear MEMS dynamics and the PID controller is ...
متن کامل