Histological differences in the adherence of connective tissue to laser-treated abutments and standard abutments for dental implants. An experimental pilot study in humans
نویسندگان
چکیده
BACKGROUND The goal of the current study is to assess the difference in connective tissue adherence to laser microtextured versus machined titanium abutments. MATERIAL AND METHODS Six patients were selected and each of them received 2 implants, one combined with a laser treated abutment and one with a machined abutment. After three months, the abutments were retrieved together with their surrounding gingival tissue for histological analysis. Qualitative and quantitative evaluation of microscopical images was performed to assess the presence or absence of adherence between the soft tissues and the abutment, and the percentage of soft tissue adhered to the two different surfaces. RESULTS Intimate adherence between connective tissue and the laser treated abutments, while on machined abutments no adherence was detected. A significant difference was found in the percentage of surface in contact with soft tissue between both implant abutments p=0.03. CONCLUSIONS Within the limitation of the current study, it can be concluded that connective tissues show enhanced adherence to microtextured abutments compared to machined abutments.
منابع مشابه
Soft tissue integration to dental implants
Soft tissue integration to dental implants Maria Welander Department of Periodontology, Institute of Odontology The Sahlgrenska Academy at University of Gothenburg, Box 450, 405 30 Göteborg, Sweden. Soft tissue integration is a prerequisite for implant success. The role of the soft tissue barrier at implants is to provide an effective seal that protects the underlying bone and prevents access f...
متن کاملEffect of Abutment Angulation and Material on Stress and Strain Distributions in Premaxillary Bone: A Three-Dimensional Finite Element Analysis
Background and Aim: Dental implants with angled abutments are often inserted in the anterior maxillary region due to the status of the residual ridge and aesthetic considerations. The purpose of this study was to assess stress and strain distributions in the premaxillary bone around dental implants by means of finite element analysis (FEA). Materials and Methods: Four three-dimensional (3D) fi...
متن کاملRandomized controlled clinical pilot study of all-ceramic single-tooth implant reconstructions: clinical and microbiological outcomes at one year of loading.
OBJECTIVE To test whether or not pink veneering of the submucosal part of zirconia abutments influences clinical, microbiological and histological outcomes of cemented implant-supported single crowns (ISSC). MATERIALS AND METHODS A total of 20 patients with one single-tooth implant in the esthetic zone were included. Implants were randomly restored with either pink-veneered zirconia abutments...
متن کاملTorque Removal Evaluation of Screw in One-Piece and Two-Piece Abutments Tightened with a Handheld screwdriver
Introduction: Some clinicians use a handheld screw driver instead of a torque wrench to definitively tighten abutment screws. The aim of this study was to compare the removal torque of one-piece and two-piece abutments tightened with a handheld driver and a torque control ratchet. Methods: 40 ITI implants were placed in acrylic blocks and divided into 4 groups. In groups one and two, 10 ITI one...
متن کاملThe mucosal barrier at implant abutments of different materials.
OBJECTIVE The aim of the present study was to analyze the soft tissue barrier formed to implant abutments made of different materials. MATERIAL AND METHODS Six Labrador dogs, about 1 year old, were used. All mandibular premolars and the first, second and third maxillary premolars were extracted. Three months later four implants (OsseoSpeed, 4.5 x 9 mm, Astra Tech Dental, Mölndal, Sweden) were...
متن کامل