Interaction of a pulsating vortex rope with the local velocity field in a Francis turbine draft tube
نویسنده
چکیده
Acoustic resonances in Francis turbines often define undesirable limitations to their operating ranges at high load. The knowledge of the mechanisms governing the onset and the sustenance of these instabilities in the swirling flow leaving the runner is essential for the development of a reliable hydroacoustic model for the prediction of system stability. The present work seeks to study experimentally the unstable draft tube flow by conducting a series of measurements on a reduced Francis Turbine model. The key physical parameters and their interaction with the hydraulic and mechanical system are studied and quantified. In particular, the evolution of the axial and tangential velocity components in the draft tube cone is analysed by means of Laser Doppler Anemometry. Combined with the calculation of the instantaneous vortex rope volume based on flow visualization and the measurement of the pressure fluctuations, the nature of the auto-oscillation in the draft tube flow is investigated.
منابع مشابه
Methodology for Risk Assessment of Part Load Resonance in Francis Turbine Power Plant
At low flow rate operation, Francis turbines feature a cavitating vortex rope in the draft tube resulting from the swirling flow of the runner outlet. The unsteady pressure field related to the precession of the vortex rope induces plane wave propagating in the entire hydraulic system. The frequency of the vortex rope precession being comprised between 0.2 and 0.4 times the turbine rotational s...
متن کاملNumerical simulation of a cavitating draft tube vortex rope in a Francis turbine at part load conditions for different σ-levels
In the present study, numerical investigations of a Francis turbine at model scale are performed. A part load operating point is selected for the analysis with a focus on the cavitating draft tube vortex rope. For three σ-levels, different aspects are investigated. First, the extension of the vapor volume is analyzed and compared to high-speed visualization recordings from the measurements. Fur...
متن کاملNumerical Study of a Pipe Extension Effect in Draft Tube on Hydraulic Turbine Performance
Draft tube of Francis type hydraulic turbine usually consists of: cone, elbow and diffuser. On the contrary, in some power stations an extra pipe should be added to the draft tube at the bottom of cone because of installation limitation. In this paper, this special case has been numerically studied. To this end CFD analysis was applied to simulate all parts of hydraulic turbine. A homogeneous m...
متن کاملPhysical Mechanisms governing Self-Excited Pressure Oscillations in Francis Turbines
The importance of renewable energy sources for the electrical power supply has grown rapidly in the past decades. Their often unpredictable nature however poses a threat to the stability of the existing electric grid. Hydroelectric powerplants play an important role in regulating the integration of renewable energy sources into the network by supplying on-demand load balancing as well as primar...
متن کاملDetermination of Hydroacoustic Draft Tube Parameters by High Speed Visualization during Model Testing of a Francis Turbine
Francis turbines can experience critical instabilities at high load operating points, limiting their maximum power output. The swirling flow developed in the draft tube produces a cavitating axisymmetric volume, acting as an internal energy source leading to a self-excited surge phenomenon. The pulsation of the vortex rope corresponds to one of the eigenfrequencies of the hydraulic system. Effo...
متن کامل