An accurate model of squirrel cage induction machines under stator faults
نویسندگان
چکیده
A substantial portion of squirrel cage induction motor faults are stator related. An accurate transient model of squirrel cage induction machines under stator faults is presented here. A coupled magnetic circuits approach is used and very few restrictive assumptions are made. All parameters are calculated from the actual geometry and winding layout of the machines rather than from transformed or equivalent variables. The detailed depiction of the procedure needed to implement such an accurate model with simulation results is the subject of this paper. © 2003 IMACS. Published by Elsevier B.V. All rights reserved.
منابع مشابه
Magnetic Saturation Impacts on Fault Analysis of Squirrel-cage Six Phases Induction Motors using Winding Function Approach
Multiple coupled circuit modeling (MCCM) of squirrel-cage induction motors (SCIMs), or winding function approach is the most detailed and complete analytical model used to analyze the performance of faulty SCIMs. Already, in variate papers this approach was used to 3phases SCIMs, but this paper extends the above-mentioned model to 6phases SCIMs. Various simulations of variative faults are carri...
متن کاملA Stator and Rotor Fault Detection Technique for Induction Machines in Traction Applications for Electric or Hybrid Electric Vehicles
Three phase induction machines for traction applications in electric and hybrid electric vehicles can be used with a fixed gear due to the wide speed range enabled by field weakening. Although the induction machine is know as an extremely reliable and robust device, machine faults may occur. Machine faults which do not become detected may cause complete failure of the vehicle. Therefore, early ...
متن کاملمدلسازی و شبیه سازی خطاهای سیم بندی استاتور موتور القایی قفس سنجابی با استفاده از روش مدار معادل مغناطیسی
Induction Motor especially the squirrel cage type of this motor plays important role in industry. According to the application type, this motor place against various stresses that are caused failure in the motor. The most common failure is related to the Stator winding. Among these failures are turn-to-turn, coil-to-coil and phase to phase faults. Flow the high current do to the induction resul...
متن کاملFault Detection of Broken Rotor Bars Using Stator Current Spectrum for the Direct Torque Control Induction Motor
The numerous qualities of squirrel cage induction machines enhance their use in industry. However, various faults can occur, such as stator short-circuits and rotor failures. In this paper, we use a technique based on the spectral analysis of stator current in order to detect the fault in the machine: broken rotor bars. Thus, the number effect of the breaks has been highlighted. The effect is h...
متن کاملStator Core Stator Winding in Slots Rotor Winding or Cage in Slots Rotor
Induction machines are perhaps the most widely used of all electric motors. They are generally simple to build and rugged, offer reasonable asynchronous performance: a manageable torque-speed curve, stable operation under load, and generally satisfactory efficiency. Because they are so widely used, they are worth understanding. In addition to their current economic importance, induction motors ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Mathematics and Computers in Simulation
دوره 63 شماره
صفحات -
تاریخ انتشار 2003