Passive Aerodynamic Drag Balancing in a Flapping-Wing Robotic Insect
نویسندگان
چکیده
Flapping-wing robotic platforms based on Dipteran insects have demonstrated lift to weight ratios greater than 1, but research into regulating the aerodynamic forces produced by their wings has largely focused on active wing trajectory control. In an alternate approach, a flapping-wing drivetrain design that passively balances aerodynamic drag torques is presented. A discussion of the dynamic properties of this millimeter-scale underactuated planar linkage accompanies an experimental test of an at-scale device. This mechanism introduces a novel strategy for regulating forces and torques from flapping wings, using passive mechanical elements to potentially simplify control systems for mass and power limited flapping-wing robotic platforms. DOI: 10.1115/1.4001379
منابع مشابه
Two-Dimensional Aerodynamic Models of Insect Flight for Robotic Flapping Wing Mechanisms of Maximum Efficiency
In the “modified quasi-steady” approach, two-dimensional (2D) aerodynamic models of flapping wing motions are analyzed with focus on different types of wing rotation and different positions of rotation axis to explain the force peak at the end of each half stroke. In this model, an additional velocity of the mid chord position due to rotation is superimposed on the translational relative veloci...
متن کاملExperimental and computational studies of the aerodynamic performance of a flapping and passively rotating insect wing
Flapping wings are important in many biological and bioinspired systems. Here, we investigate the fluid mechanics of flapping wings that possess a single flexible hinge allowing passive wing pitch rotation under load. We perform experiments on an insect-scale (≈1 cm wing span) robotic flapper and compare the results with a quasi-steady dynamical model and a coupled fluid–structure computational...
متن کاملLoading Estimation of Flapping Wings under Aeroelastic Effect Using Finite Element Method
The aim of this paper is to provide an aeroelastic computational tool which determines the induced wing loads during flapping flight. For this purpose, a Finite Element (FE) code based on a four-node plate bending element formulation is developed to simulate the aeroelastic behavior of flapping wings in low incompressible flow. A quasi-steady aerodynamic model is incorporated into the aeroelast...
متن کاملEffect of wing inertia on hovering performance of flexible flapping wings
Insect wings in flight typically deform under the combined aerodynamic force and wing inertia; whichever is dominant depends on the mass ratio defined as m = sh / fc , where sh is the surface density of the wing, f is the density of the air, and c is the characteristic length of the wing. To study the differences that the wing inertia makes in the aerodynamic performance of the deformable wing,...
متن کاملAerodynamic performance of a hovering hawkmoth with flexible wings: a computational approach.
Insect wings are deformable structures that change shape passively and dynamically owing to inertial and aerodynamic forces during flight. It is still unclear how the three-dimensional and passive change of wing kinematics owing to inherent wing flexibility contributes to unsteady aerodynamics and energetics in insect flapping flight. Here, we perform a systematic fluid-structure interaction ba...
متن کامل