A Review on Dead-Time Effects in PWM Inverters and Various Elimination Techniques
نویسنده
چکیده
Dead-time is necessary to prevent the short circuit of the power supply in PWM Inverters or converters. But, it will result in output voltage deviations and in case of lower values of current, lower order harmonics will be taken into account. So, dead-time elimination is required in all PWM Inverters or converters. This paper is dealing with a summary of dead-time effects in PWM inverters and various methodologies proposed for eliminating the dead-time and improving the R.M.S value of the output voltage and removing the harmonics concurrently.
منابع مشابه
Conduction and Dead-Time Voltage Drops Estimation of Asymmetric Cascaded H-Bridge Converters Utilizing Level-Shifted PWM Scheme
Linear AC power supplies can be replaced by their nonlinear switching counterparts due to the lower voltage drops and higher efficiency and power density of switching-mode inverters. Multilevel cascaded H-bridge (CHB) converters are the preferred inverter structure because of modular configuration, control, and protection. The output voltage quality in CHB converters depends on the number of ou...
متن کاملSpace Vector Modulation Based on Classification Method in Three-Phase Multi-Level Voltage Source Inverters
Pulse Width Modulation (PWM) techniques are commonly used to control the output voltage and current of DC to AC converters. Space Vector Modulation (SVM), of all PWM methods, has attracted attention because of its simplicity and desired properties in digital control of Three-Phase inverters. The main drawback of this PWM technique is its complex and time-consuming computations in real-time im...
متن کاملPulse-based dead-time compensator for PWM voltage inverters
circuit of the power supply in pulse width modulated (PWM) voltage inverters results in output voltage deviations. Although individually small, when accumulated over an operating cycle, the voltage deviations are sufficient to distort the applied PWM signal. This paper presents a new method to correct for the dead time deviations. The Pulse Based Compensator is less hardware and software intens...
متن کاملIntroduction and Analysis of a Novel Quasi - Series Resonant DC Link
Soft Switcing techniques have recently been applied in the design of dc-ac converters, in order to achive better performance, higher efficiency, and power density. One of the soft switching techniques uesd in inverters is resonant dc links. These topologies have some disadvantages such as irregular current peaks, large voltage peaks, uncotrollble pulse width, etc. Another soft switching method ...
متن کاملSpace Vector Modulation Based on Classification Method in Three-Phase Multi-Level Voltage Source Inverters
Pulse Width Modulation (PWM) techniques are commonly used to control the output voltage and current of DC to AC converters. Space Vector Modulation (SVM), of all PWM methods, has attracted attention because of its simplicity and desired properties in digital control of Three-Phase inverters. The main drawback of this PWM technique is 
its complex and time-consuming computations in real-time ...
متن کامل