Wst 49.11-12 B28 Corr
نویسنده
چکیده
The performance of an upflow anaerobic sludge blanket (UASB) reactor and a hybrid UASB-filter reactor was investigated and compared for the treatment of domestic wastewater at different operational temperatures (28, 20, 14 and 10°C) and loading rates. For each temperature studied a constant CODt removal was observed as long as the upflow velocity was lower than 0.35 m/h. At these upflow velocities similar removals were observed for both reactor types at 28 and 20°C, 82 and 72% respectively. However, at 14 and 10°C the UASB reactor showed a better COD removal (70% and 48%, respectively) than the hybrid reactor (60% and 38%). COD removal resulted from biological degradation and solids accumulation in the reactors. At 28°C, a constant 200 g sludge mass was observed in both reactors and COD removal was attributed to biological degradation only. At lower temperatures, solids accumulation was observed in addition to biological degradation with an increase in reactor sludge as the temperature decreased. The decrease in biological degradation at lower temperatures was offset by solids accumulation and explains the similar overall COD removal efficiency observed at 28°C, 20°C and 14°C. The decrease in temperature was also followed by an increase in the effluent TSS concentration in both reactors. At 14 and 10°C a lower effluent TSS concentration and better performance was observed in the UASB reactor.
منابع مشابه
Wst 49.11-12 B18 Corr
A new continuum model for the growth of a single species biofilm is proposed. The geometry of the biofilm is described by the interface between the biomass and the surrounding liquid. Nutrient transport is given by the solution of a semi-linear Poisson equation. In this model we study the morphology of a chemotactic bacterial colony, which grows in the direction of increasing nutrient concentra...
متن کاملWst 49.11-12 B19 Corr
Structural and microbial heterogeneity occurs in almost any type of biofilm system. General approaches for the design of biofilm systems consider biofilms as homogeneous and of constant thickness. In order to improve the design of biofilms systems, models need to incorporate structural heterogeneity and the effect of inert microbial mass. We have improved a 2D biofilm model based on cellular au...
متن کاملWst 49.11-12 B14 Corr
The numerical simulation of mass transfer and conversion in spatially heterogeneous biofilms on the meso-scale requires an accurate description of the hydrodynamics in the biofilm systems and of spatial effects. This leads to systems of three-dimensional nonlinear partial differential equations that are numerically very expensive to solve and to data requirements that are not easy to meet. In t...
متن کاملWst 49.11-12 B49 Corr
To show that an adsorbing biofilm carrier (GAC) can be advantageous for atrazine bioremediation over a non-adsorbing carrier, fluidized bed (FB) reactors were operated under atrazine limiting concentrations using Pseudomonas sp. strain ADP as the atrazine degrading bacteria. The following interrelated subjects were investigated: 1) atrazine adsorption to GAC under conditions of atrazine partial...
متن کاملWst 49.11-12 B17 Corr
The mathematical modeling of spatial biofilm formation that provides the capability to predict biofilm structure from first principles has been in development for the past six years. However, a direct and quantitative link between model predictions and the experimentally observed structure formation still remains to be established. This work assesses the capability of a state-of-the-art techniq...
متن کامل