Effects of heterogeneities on capillary pressure-saturation-relative permeability relationships.

نویسندگان

  • Behzad Ataie-Ashtiani
  • S Majid Hassanizadeh
  • Michael A Celia
چکیده

In theories of multiphase flow through porous media, capillary pressure-saturation and relative permeability-saturation curves are assumed to be intrinsic properties of the medium. Moreover, relative permeability is assumed to be a scalar property. However, numerous theoretical and experimental works have shown that these basic assumptions may not be valid. For example, relative permeability is known to be affected by the flow velocity (or pressure gradient) at which the measurements are carried out. In this article, it is suggested that the nonuniqueness of capillary pressure-relative permeability-saturation relationships is due to the presence of microheterogeneities within a laboratory sample. In order to investigate this hypothesis, a large number of "numerical experiments" are carried out. A numerical multiphase flow model is used to simulate the procedures that are commonly used in the laboratory for the measurement of capillary pressure and relative permeability curves. The dimensions of the simulation domain are similar to those of a typical laboratory sample (a few centimeters in each direction). Various combinations of boundary conditions and soil heterogeneity are simulated and average capillary pressure, saturation, and relative permeability for the "soil sample" are obtained. It is found that the irreducible water saturation is a function of the capillary number; the smaller the capillary number, the larger the irreducible water saturation. Both drainage and imbibition capillary pressure curves are found to be strongly affected by heterogeneities and boundary conditions. Relative permeability is also found to be affected by the boundary conditions; this is especially true about the nonaqueous phase permeability. Our results reveal that there is much need for laboratory experiments aimed at investigating the interplay of boundary conditions and microheterogeneities and their effect on capillary pressure and relative permeability.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Determination of Resistivity Index, Capillary Pressure, and Relative Permeability

It is known that the three important parameters: resistivity, capillary pressure, and relative permeability, are all a function of fluid saturation in a porous medium. This implies that there may be a correlation among the three parameters. There have been many papers on the approach to inferring relative permeability from capillary pressure data. However the literature on the interrelationship...

متن کامل

Dynamic Effect in the Capillary Pressure–Saturation Relationship and its Impacts on Unsaturated Flow

where Pn and Pw are the average pressures of nonwetting and wetting phases, respectively; Pc is capillary pressure, Capillary pressure plays a central role in the description of water and S is the wetting phase saturation. A schematic depicflow in unsaturated soils. While capillarity is ubiquitous in unsaturated tion of Pc vs. S curves is given in Fig. 1. analyses, the theoretical basis and pra...

متن کامل

Study of Two Phase Fluid Flow in Water Wet Reservoir Rocks by Using X-Ray In situ Saturation Monitoring

Displacement of oil and water in porous media of reservoir rocks is described by relative                      permeability curves, which are important input data for reservoir performance simulation and drive mechanism studies. Many core studies, such as multiphase relative permeability, capillary pressure and saturation exponent determination, depend on the volume fractions of multiphase flui...

متن کامل

An Efficient Method for Determining Capillary Pressure and Relative Permeability Curves from Spontaneous Imbibition Data

In this paper, a very efficient method, called single matrix block analyzer (SMBA), has been developed to determine relative permeability and capillary pressure curves from spontaneous imbibition (SI) data. SMBA mimics realistically the SI tests by appropriate boundary conditions modeling. In the proposed method, a cuboid with an identical core plug height is considered. The equal dimensions of...

متن کامل

Modeling support of functional relationships between capillary pressure, saturation, interfacial area and common lines

Computational pore-scale network models describe two-phase porous media ̄ow systems by resolving individual interfaces at the pore scale, and tracking these interfaces through the pore network. Coupled with volume averaging techniques, these models can reproduce relationships between measured variables like capillary pressure, saturation, and relative permeability. In addition, these models all...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of contaminant hydrology

دوره 56 3-4  شماره 

صفحات  -

تاریخ انتشار 2002