The Critical Role of Thioacetamide Concentration in the Formation of ZnO/ZnS Heterostructures by Sol-Gel Process

نویسندگان

  • Eloísa Berbel Manaia
  • Renata Cristina Kiatkoski Kaminski
  • Bruno Leonardo Caetano
  • Marina Magnani
  • Florian Meneau
  • Amélie Rochet
  • Celso Valentim Santilli
  • Valérie Briois
  • Claudie Bourgaux
  • Leila Aparecida Chiavacci
چکیده

ZnO/ZnS heterostructures have emerged as an attractive approach for tailoring the properties of particles comprising these semiconductors. They can be synthesized using low temperature sol-gel routes. The present work yields insight into the mechanisms involved in the formation of ZnO/ZnS nanostructures. ZnO colloidal suspensions, prepared by hydrolysis and condensation of a Zn acetate precursor solution, were allowed to react with an ethanolic thioacetamide solution (TAA) as sulfur source. The reactions were monitored in situ by Small Angle X-ray Scattering (SAXS) and UV-vis spectroscopy, and the final colloidal suspensions were characterized by High Resolution Transmission Electron Microscopy (HRTEM). The powders extracted at the end of the reactions were analyzed by X-ray Absorption spectroscopy (XAS) and X-ray diffraction (XRD). Depending on TAA concentration, different nanostructures were revealed. ZnO and ZnS phases were mainly obtained at low and high TAA concentrations, respectively. At intermediate TAA concentrations, we evidenced the formation of ZnO/ZnS heterostructures. ZnS formation could take place via direct crystal growth involving Zn ions remaining in solution and S ions provided by TAA and/or chemical conversion of ZnO to ZnS. The combination of all the characterization techniques was crucial to elucidate the reaction steps and the nature of the final products.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Dimethylamine Controlled Sol-Gel Process to Grow ZnO Nanorods

ZnO nanorods were prepared using dimethylamine (DMA) controlled Sol-Gel process. Dimethylamine was added as an additive to control the sol-gel process for growing ZnO nanorods. DMA would exhibit stabilizing effect, promote dissolution of precursor and control the rate of sol-gel reactions because of its basic nature and significant miscibility. The Structural and microstructural properties of t...

متن کامل

Structural and Morphology Study of ZnO/CuO Powders Prepared by Combination of Sol-gel Auto Combustion and Ultrasonic Irradiation Methods with Different Fuels

Nanocrystalline complex oxides have been synthesized by combination of sol–gel auto combustion and ultrasonic irradiation techniques using copper nitrate, zinc nitrate as metallic nitrates and glycine, urea and thiourea as fuels. Sol-gel combustion (combination of the chemical sol–gel process and the combustion process) as a proper synthesized technique is used to synthesize ZnO/CuO nanocomposi...

متن کامل

Structural and Morphology Study of ZnO/CuO Powders Prepared by Combination of Sol-gel Auto Combustion and Ultrasonic Irradiation Methods with Different Fuels

Nanocrystalline complex oxides have been synthesized by combination of sol–gel auto combustion and ultrasonic irradiation techniques using copper nitrate, zinc nitrate as metallic nitrates and glycine, urea and thiourea as fuels. Sol-gel combustion (combination of the chemical sol–gel process and the combustion process) as a proper synthesized technique is used to synthesize ZnO/CuO nanocomposi...

متن کامل

Cytotoxicity effects of synthesized ZnO and Zn0.97X0.03O (X=Li, Na, and K) nanoparticles by the gelatin-based sol-gel method

Objective: In this study we would like to report the synthesis of pure and group I element doping of ZnO nanoparticles (ZnO-NPs) prepared using gelatin. The use of natural polymers for the preparation of the pure and doped nanoparticles can result in achieving low cost and eco-friendly advantages.Materials and Method: Pure and doped ZnO-NPs were obtained at 500 °C and The cytotoxicity of nanopa...

متن کامل

Fabrication of Ultraviolet Photodetector Based on ZnO Nanostructures and Calcium Impurities Using Sol-Gel Method

In this paper an ultraviolet (UV) photodetector has been fabricated using ZnO nanostructures. The cheap fabrication process, high-quality nanostructures and the desired results for the photodetector are the most important characteristics of the proposed method. ZnO nanostructures have been grown using sol-gel method. In order to increase the sensitivity, calcium impurities have been added to na...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 8  شماره 

صفحات  -

تاریخ انتشار 2018