Damage buildup in Si under bombardment with MeV heavy atomic and molecular ions
نویسندگان
چکیده
منابع مشابه
Simulations of dynamical stabilization of Ag–Cu nanocomposites by ion-beam processing
Recent theoretical results indicate that ion-beam mixing can be used to synthesize nanocomposite structures from immiscible elements, relying on a self-organization phenomenon at steady state under irradiation. According to this modeling, self organization requires that the range of the forced atomic relocations in displacement cascades exceeds a critical value. Experimental evidence supporting...
متن کاملProcessing of nano-holes and pores on SiO2 thin films by MeV heavy ions
Scanned beams of 0.1 MeV/u Au ions were employed for the bombardment of silicon oxide films thermally grown on silicon (1 0 0) substrates. Subsequently the films were etched in aqueous HF solution (1% and 4%) for various times and at different temperatures. Scanning force microscopy and transmission electron microscopy images of etched films reveal conical holes with diameters from 20 to 350 nm...
متن کاملDepth profiling of peptide films with TOF-SIMS and a C60 probe.
A buckminsterfullerene ion source is employed to characterize peptide-doped trehalose thin films. The experiments are designed to utilize the unique sputtering properties of cluster ion beams for molecular depth profiling. The results show that trehalose films with high uniformity can be prepared on Si by a spin-coating technique. Bombardment of the film with C60+ results in high quality time-o...
متن کاملSpace Environment and Evaluation of Typical High Altitude Satellite
The space environment consists mainly of high-energy charged particles, such as protons, electrons and heavy ions. They are originating from several sources including galactic cosmic radiation, solar flares and van Allen belts. High energy electromagnetic radiation and neutrons have also been measured on spacecraft. Although shielding can reduce the effect of space radiation it cannot be elimin...
متن کاملAvoiding preamorphization damage in MeV heavy ion-implanted silicon
Implantation of 1.0 MeV ‘isIn in Si results in secondary-defect formation during subsequent 900 “C annealing if the total number of displaced Si atoms is greater than 1.6~ lOi’/ cm’, achieved with a dose near 1.5 X 10i3/cm2. We demonstrate, though, that higher total In doses can be introduced without forming secondary defects by repetitive subthreshold implants each followed by an anneal to rem...
متن کامل