Tension Softening Behavior of Fiber Reinforced Concrete

نویسندگان

  • Kaluvapudi. Akhil
  • M. K. M. V. Ratnam
  • Ranga Raju
چکیده

The project aims to study tensile softening behavior of fiber reinforced concrete .Concrete is very much weak in tension but by addition of randomly oriented short crimped steel fibers will change the behavior from brittle to ductile. In the present work, the steel fibers were added at the volume fraction, being 0%, 0.5%, 1%, 1.5% to the normal strength concrete and high strength concrete. The effects of steel fibbers on the tensile behavior of high and normal strength are investigated. In the project work the tensile behavior of concrete reinforced with steel fiber contents was assessed performing direct tensile tests .The fracture energy of conventional SFRC was independent of the specimen size. The fracture energy of SFRC with high strength matrix and normal strength matrix was dependent on the tensile strength of the steel fibers. From the results found that with an increase in % of fibers the tensile softening behavior increases and fracture energy also increases.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Cohesive fracture model for functionally graded fiber reinforced concrete

a r t i c l e i n f o Keywords: Concrete (E) Fiber reinforced concrete (FRC) (E) Constitutive relationship (C) Cohesive fracture (C) Fracture energy (C) A simple, effective, and practical constitutive model for cohesive fracture of fiber reinforced concrete is proposed by differentiating the aggregate bridging zone and the fiber bridging zone. The aggregate bridging zone is related to the total...

متن کامل

Effect of Reinforcement Type on the Tension Stiffening Model of Ultra-High Performance Concrete (UHPC)

Ultra-high performance concrete (UHPC) is a developing concrete and today is increasing to interest using it in structures due to its advantages such as high-compressive strength, modulus of elasticity, highly durability and low-permeability. Therefore, it is necessary to provide models for prediction of nonlinear behavior of this material. This study is aimed to investigate the tension-stiffen...

متن کامل

Structural Behavior of Fiber

An indirect J-integral technique for measuring the tension softening curve of non-yielding materials like concrete is presented and is applied to mortars reinforced with various short fiber types (steel and synthetic). The tension softening curve serves to characterize and measure material fracture resistance. The dependence of structural behavior on material fracture resistance is investigated...

متن کامل

General Design Assumptions for Engineered Cementitious Composites

The use of Engineered Cementitious Composites (ECC) for structural design requires a number of assumptions of the material, some of which can be drastically different from those suitable for normal concrete and tension-softening fiber reinforced concrete. This contribution focuses on design assumptions of the constitutive models of ECC in tension and compression. Specifically, while the tensile...

متن کامل

Optimizing of Steel Fiber Reinforced Concrete Mix Design

Cementitious matrices are the fragile materials that possess a low tensile strength. The addition of fibers randomly distributed in these matrices improves their resistance to cracking, substantially. However, the incorporation of fibers into a plain concrete disrupts the granular skeleton and quickly causes problems of mixing as a result of the loss of mixture workability that will be translat...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016