Suppression of Stiction in MEMS
نویسنده
چکیده
Stiction failures in microelectromechanical systems (MEMS) occur when suspended elastic members are unexpectedly pinned to their substrates. This type of device failure develops both in fabrication and during device operation, being a dominant source of yield loss in MEMS. Stiction failures require first a collapse force that brings the elastic member contact with the substrate followed by an intersolid adhesion sufficiently large to overcome the elastic restoring force. Stiction failure mechanisms have been studied extensively elsewhere [1]. This paper briefly summarizes these mechanisms in a the practical way. Over the last decade, stiction failure rates in MEMS have been minimized using a wide variety of processing, surface treatment, and physical schemes. An update of these methods is provided.
منابع مشابه
On the reliability of electrostatic NEMS/MEMS devices: Review of present knowledge on the dielectric charging and stiction failure mechanisms and novel characterization methodologies
This paper reviews the state of the art knowledge related to critical failure mechanisms in electrostatic microand nano-electromechanical systems (MEMS and NEMS) which are the dielectric charging and stiction. It describes also the recent employed nanoscale characterization techniques for these phenomena based on Kelvin probe force microscopy (KPFM) and force–distance curve measurements. The in...
متن کاملA ‘nano-battering ram’ for measuring surface forces - Obtaining force-distance curves and sidewall stiction data with a MEMS device
MEMS (micro-electromechanical systems) devices often suffer from stiction induced reliability problems. Although a theoretical framework to describe stiction in MEMS is under development in the scientific community, experimental data are still scarce. We have developed a MEMS device that can be used to electronically measure sidewall surface forces in situ, i.e. on chip. To be able to use it, w...
متن کاملSelf-assembled monolayers as anti-stiction coatings for MEMS: characteristics and recent developments
Despite significant advances in surface micromachining technology, stiction remains a key problem, severely limiting the realization Ž . and reliability of many micro-electro-mechanical systems MEMS devices. In this article, we focus on self-assembled monolayers as release and anti-stiction coatings for MEMS. Their formation mechanism, the microstructure coating process, and the characteristics...
متن کاملLow Voltage Totally Free Flexible RF MEMS Switch With Anti-Stiction System
This paper concerns a new design of RF MEMS switch combined with an innovative process which enable low actuation voltage (<5V) and avoid stiction. First, the structure described with principal design issues, the corresponding antistiction system is presented and FEM simulations are done. Then, a short description of the process flow based on two non polymer sacrificial layers. Finally, RF meas...
متن کاملEnhancement of RF-MEMS switch reliability through an active anti-stiction heat-based mechanism
MicroElectroMechanical Systems for Radio Frequency applications (i.e. RF-MEMS) show very good performance and characteristics. However, their employment within large-scale commercial applications is still limited by issues related to the reliability of such components. In this work we present the Finite Element Method (FEM) modelling and preliminary experimental results concerning an active res...
متن کامل