Comparison of Statistically Controlled Machining Solutions of Titanium Alloys Using Usm
نویسنده
چکیده
The purpose of the present investigation is to compare the statistically controlled machining solution of titanium alloys using ultrasonic machining (USM). In this study, the previously developed Taguchi model for USM of titanium and its alloys has been investigated and compared. Relationships between the material removal rate, tool wear rate, surface roughness and other controllable machining parameters (power rating, tool type, slurry concentration, slurry type, slurry temperature and slurry size) have been deduced. The results of this study suggest that at the best settings of controllable machining parameters for titanium alloys (based upon the Taguchi design), the machining solution with USM is statistically controlled, which is not observed for other settings of input parameters on USM.
منابع مشابه
An investigation into the machining characteristics of titanium using ultrasonic machining
This paper presents a review on the problems encountered in machining titanium and application of USM in machining titanium and its alloys. Experiments have been conducted to assess the effect of three factors-tool material, grit size of the abrasive slurry and power rating of ultrasonic machine on machining characteristics of titanium (ASTM Grade I) using full factorial approach for design and...
متن کاملMachining Process Parameters of USM- A Review
The selection of optimum process parameters is crucial for advanced machining processes, as these processes incur high initial investment, tooling cost, and operating and maintenance costs. In this paper, a review of machining process parameters for different materials is done in ultrasonic machining (USM). Machining of Different materials like ceramics, Glass Porcelain, Titanium, is done by di...
متن کاملMachinability evaluation of Titanium alloy in Laser Assisted Turning
The use of titanium and its alloys has increased in various industries recently, because of their superior properties of these alloys. Titanium alloys are generally classified as difficult to machine materials because of their thermo-mechanical properties such as high strength-to-weight ratio and low thermal conductivity. Laser Assisted Machining (LAM) improves the machinability of high strengt...
متن کاملMachinability evaluation of Titanium alloy in Laser Assisted Turning
The use of titanium and its alloys has increased in various industries recently, because of their superior properties of these alloys. Titanium alloys are generally classified as difficult to machine materials because of their thermo-mechanical properties such as high strength-to-weight ratio and low thermal conductivity. Laser Assisted Machining (LAM) improves the machinability of high strengt...
متن کاملDevelopment of Design and Manufacturing Support Tool for Optimization of Ultrasonic Machining (USM) and Rotary USM
Ultrasonic machining (USM) is a mechanical material removal process used to erode holes and cavities in hard or brittle work pieces by using shaped tools, high-frequency and an abrasive slurry. This paper addresses the concept and development of an expert system (ES) for hard and brittle material, such as glass, quartz, diamond, carbides, semi conducting materials, ceramic and graphite which ca...
متن کامل