Integration of the NIST and SURDAT Databases on Physical Properties of Lead-Free Solder Alloys
نویسندگان
چکیده
The electronic SURDAT database published in 2007 (available freely from the website www.imim.pl/english) is being integrated with the NIST database (available freely from www.boulder.nist.gov/div853/lead_free/solders.html) to provide a single source for data on lead-free (Pb-free) soldering alloys. The NIST database was developed to support circuit board designers, and so it is focused primarily on mechanical properties. In contrast, the SURDAT database is focused primarily on thermophysical properties. Together, they will form a much more complete source for the properties of Pb-free solder alloys.
منابع مشابه
Investigation of microstructure and physical properties in nanocomposite solder reinforced with various percent of graphene nanosheets (SAC0307+GNSs)
Development of electronic industries, compression of electronic equipment, and removing lead from electronic circuits for environmental issues, resulted in a significant challenge in design and development of tin-based lead-free solders with physical and mechanical properties similar to old tin-lead alloys. In this regard, the set of Sn-Ag-Cu alloys with eutectic and near eutectic compositions ...
متن کاملInvestigation of microstructure and physical properties in nanocomposite solder reinforced with various percent of graphene nanosheets (SAC0307+GNSs)
Development of electronic industries, compression of electronic equipment, and removing lead from electronic circuits for environmental issues, resulted in a significant challenge in design and development of tin-based lead-free solders with physical and mechanical properties similar to old tin-lead alloys. In this regard, the set of Sn-Ag-Cu alloys with eutectic and near eutectic compositions ...
متن کاملWorkability study in near-pritectic Sn-5%Sb lead-free solder alloy processed by severe plastic deformation
Prediction of the deformation characteristics is an important step to understand the workability of alloys during imposing large strains. In this research, severe plastic deformation of Sn-5Sb solder alloy was carried out under different t deformation conditions, including the temperature range of 298, 330, 36, 400 K and die designs. The current study applies an experimentally validated finite ...
متن کاملConstitutive Property Testing and Reliability Assessment of Lead - Free Solder Joint
Title of Document: CONSTITUTIVE PROPERTY TESTING AND RELIABILITY ASSESSMENT OF LEADFREE SOLDER JOINT Yuri Lee, Master, 2010 Directed By: Professor Bongtae Han, Department of Mechanical Engineering A modified single lap shear test configuration, based on the Iosipescu geometry, is proposed to characterize mechanical properties of solder alloys. In the method, an auxiliary device (extension unit)...
متن کاملMechanical Properties and Solder Joint Reliability of Low-Melting Sn-Bi-Cu Lead Free Solder Alloy
The influence of alloy composition of lowmelting Sn-Bi-Cu lead-free solder alloys on mechanical properties and solder joint reliabilities were investigated. The mechanically optimum alloy composition is Sn-40Bi-0.1Cu (mass%). The addition of 40mass%Bi improves the ductility and restrains the fillet-lifting, which are problems of lead-free solders with Bi. The addition of copper improves both th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2010