SU-E-T-554: PTV to Skin Proximity for Head and Neck IMRT Treatment Planning.

PURPOSE The goal of this work was to evaluate measured vs. calculated surface dose as a function of PTV-to-skin proximity and calculation matrix oxel size, determine effects on plan quality, and provide parameters and levels of uncertainty for clinical use. METHODS A right-sided CTV with the lateral border 5mm from the surface was delineated on the CT data of a head and neck phantom. A 5mm PTV was generated except laterally where distances of 0-5mm were used. A 7-field IMRT plan was generated using the Eclipse TPS. Optimization was performed where 95% of the PTV receives the prescription dose using a matrix size of 2mm3 . Dose calculations were repeated for grid sizes of 1, 3 and 5mm3 . For each plan nine point dose values were obtained just inside the phantom surface, corresponding to a 2cm2 grid near the central target region. Nine ultra-thin TLDs were placed on the phantom surface corresponding to the grid. Measured and calculated dose values were compared. Conformality, homogeneity and target coverage were compared. RESULTS Surface dose is over-estimated by the TPS by 21 and 8% for 5 and 3mm3 voxels, respectively and accurately predicted for 2mm3 voxels. A voxel size of 1mm3 results in underestimation of 13%. Conformality improves with increasing PTV to skin distance and a CI of unity results for grid sizes of 1-3mm3 between 4 and 4.5mm. Hot spot decreases as the PTV moves away from the surface and falls below 110% at 4mm. Underdosage worsens as the PTV approaches the skin. CONCLUSIONS For decreasing PTV-to-skin distance with this TPS, isodose conformality decreases, 'hot spot' increases, and target coverage degrades. Surface dose is accurately predicted for a 2mm3 voxel size, while choosing a finer or coarser grid results in underestimation or overestimation, respectively. All of the above appear to hold for VMAT.