Simulating Realistic Bridging and Crosstalk Faults in an Industrial Setting
نویسندگان
چکیده
Three different techniques for simulating realistic faults generated from IC layout are discussed. Two of them deal with bridging faults, and the third one handles crosstalk faults. The simulation is performed on top of a commercial simulator and thus is very well applicable in an industrial environment. No change of the design database and only minimal changes of the test shell are required. Experimental results are reported for a library cell and a block from a full-custom design.
منابع مشابه
Analytic Study of Undetectable Bridging Faults in Combinational Circuits
Physical faults include bridging faults, break (open) faults, transistor stuck-on and transistor stuck-off. Compared to traditional gate-level stuck-at faults, physical faults more closely represent realistic faults appearing at the gate level and transistor level. Analytical modelling for such faults, used for design and testability, is still a new and emerging area. Undetectable bridging faul...
متن کاملSwitch-Level Fault Simulation and Test Generation for Competing Bridging Faults
This paper investigates the degradation in diagnosability of bridging faults caused by situations of active feedback and logically unresolvable intermediate values under different fault modeling assumptions. The experimental results show that active feedback may reduce the fault coverage by as much as 7% for stuck-at test sets and realistic bridging fault sets. A test generation method for full...
متن کاملEfficient Bridging Fault Simulation of Sequential Circuits Based on Multi-Valued Logics
We present the concept of a multi-valued logic simulator for bridging faults in sequential circuits. Different models for the handling of intermediate values in flipflops on the digital design level can be integrated and result in an Expected realistic behavior area for bridging faults. Several experimental results are given to underline properties and advantages of the simulation technique.
متن کاملModeling of Heat Losses Within Combustion Chamber of Diesel Engines
The cylinder working fluid mean temperature, rate of heat fluxes to combustion chamber and temperature distribution on combustion chamber surface will be calculated in this research. By simulating thermodynamic cycle of engine, temperature distribution of combustion chamber will be calculated by the Crank-Nicolson method. An implicit finite difference method was used in this code. Special treat...
متن کاملXSIM: An Efficient Crosstalk Simulator for Analysis and Modelling of Signal Integrity Faults
The paper presents an efficient crosstalk simulator tool “XSIM” and it’s methodology developed by the signal integrity fault modeling and test research group of ITEM, University of Bremen, for analysis and modeling of signal integrity faults in deep sub-micron (DSM) chip. The tool can be used for analyzing the crosstalk coupling behavior in both defective and defect-free parallel interconnects....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- J. Electronic Testing
دوره 19 شماره
صفحات -
تاریخ انتشار 2003